HP StorageWorks 2/140 director release notes - Page 10

Known Issues Ports May Accumulate Spurious Events A port may accumulate "Invalid transmission word" and "Bit-Error Threshold Link Incident" events when a transceiver is poorly seated resulting in a poor ground connection. Workaround Reseating the optical transceiver will correct the problem. Director Properties Description May Be Incorrect The text shown in the Description field of the Director Properties panel for the Director 2/140 may be incorrect. It may show SAN Director 64. This has no effect on the operation of the Director 2/140. This is a user-configurable description for the director, and may be changed to whatever you want by choosing Configure > Identification using HAFM, or by choosing Configure > Director > Identification using the Embedded Web Server interface. IML Is Required After Performing a Configuration Reset If a Reset Configuration is performed on a Director 2/140 to reset the director to factory configuration, an initial machine load (IML) is required to be performed to complete the process. This is done by pressing the white button on the front of either CTP card for more than three seconds. This can also be accomplished by turning the power to the Director 2/140 off, and then back on. 10 director release notes