HP StorageWorks 2/140 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN En - Page 283

Configuration Planning Tasks 6 Table 6-2 Physical Planning and Hardware Installation Tasks Activity Locate the physical facilities. Connect the facility alternating current (AC) power circuits. Obtain an uninterruptable power supply (optional). Obtain two outside-access phone lines. Order and deliver Ethernet and fiber-optic cables with appropriate connectors. Cables must support Fibre Channel network, management network, and IP WAN network (if SAN routing is supported) connectivity. Order the Fabricenter cabinet with one or more McDATA managed products. Order Fibre Channel devices and peripherals. Determine proximity of the equipment cabinet (with directors, fabric switches, and SAN routers) to attached devices (multimode shortwave laser or singlemode longwave laser). Task Owner Due Date Comments If more than one managed product, consider separate power circuits for availability. Recommended. One for the modem and the second for a telephone. Cables are purchased by the customer separately. Plan to have cables installed before equipment cabinet delivery. 500 meters (1.0625 Gbps), 300 meters (2.1250 Gbps), or 150 meters (10.2000 Gbps) for 50/125 mm multimode cable. 250 meters (1.0625 Gbps), 120 meters (2.1250 Gbps), or 75 meters (10.2000 Gbps) for 62.5/125 mm multimode cable. Install Fibre Channel devices and peripherals. Set up server peripheral for inband director or switch management (optional). Route fiber-optic jumper cables. Set up local area network (LAN) connections for directors, fabric switches, SAN routers, and the management server. 10, 20, or 35 kilometers for 9/125 mm singlemode cable, depending on the optic purchased. Order OSMS or FMS product feature enablement (PFE) key. If SAN routing is supported, provide additional management server configuration tasks. Configuration Planning Tasks 6-35