HP StorageWorks 2/140 FW 07.01.02/HAFM SW 08.06.00 HP StorageWorks Director Re - Page 8

Zonesets containing domain/port number zones while in Open Fabric interop mode no longer cause zoning to hang When directors and edge switches in a fabric were configured for Open Fabric 1.0 interop mode, and the fabric's zoneset contained a zone with members defined by domain/port number instead of World Wide Name, activating changes to the zoneset could cause the Zone Manager to hang. When this occurred, the Zone Manager could hang indefinitely, preventing any further zone activities from any management location. It should be noted that domain/port number zones are not supported in Open Fabric 1.0 interop mode, and are ignored. The Zone Manager will no longer hang under these conditions, and these zones are still ignored in Open Fabric 1.0 interop mode. Occasional Ethernet hang issue is resolved Under certain conditions, the Ethernet communications could intermittently hang on director 2/140, edge switch 2/24, and edge switch 2/12. This issue has been corrected. Features not supported in this release The following director and edge switch feature is not supported in this release: • SANtegrity Authentication The following HAFM features are not supported in this release: • SANtegrity Security Center • Group Configuration Manager These features are described in the documentation released with firmware 07.00.00 and HAFM 08.06.00. Some of these features may be available in a future release. 6