HP StorageWorks 2/16N Brocade Fabric Manager Administrator's Guide (53-1000019 - Page 185
Downloading a Configuration, Downloading to Switches from a Baseline File
View all HP StorageWorks 2/16N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Using Baseline Configurations for Configuration Management 11 Downloading a Configuration You can download a configuration to a switch from a baseline file or from another switch. During the download process, you can choose the settings that you want to download and the settings that you want to omit. See "Saving a Baseline Configuration to a File" on page 11-14 for instructions on saving a baseline configuration file. The configuration download succeeds only if all of the configuration parameters are successfully downloaded. If some of the configuration parameters are not accepted by the switch, then the entire configuration download fails and Fabric Manager displays a message indicating which parameters caused the failure. • "Downloading to Switches from a Baseline File" on page 11-19 • "Downloading to Switches from a Baseline Switch" on page 11-20 Downloading to Switches from a Baseline File The following procedure describes how to download a configuration from a baseline file to one or more switches. To download a baseline file to one or more switches 1. Select Tasks > Configuration Management > Compare/Download from File. The Compare/Download from File -- Select Baseline Configuration dialog opens (see Figure 11-16 on page 11-17). 2. Navigate to the baseline file and click Open. The Compare/Download from File -- Target Switch Selection window opens. 3. From the SAN Elements tab, select the switches that you want to receive the baseline file from and click the right-arrow or drag the switches to move them to the right-hand window. You can use Ctrl-click or Shift-click to select multiple switches. 4. Click OK. The Compare/Download from File -- Switch Configuration comparison and Download window displays and compares the configurations of the switches to the baseline. Fabric Manager displays a warning that the selected switches will be disabled and rebooted. 5. Click Apply Baseline to apply this baseline to the switches that you selected. A series of prompts are displayed to ensure that you are not downloading a configuration accidentally; then the Apply Baseline window displays, as shown in Figure 11-19. Fabric Manager Administrator's Guide Publication Number: 53-1000196-01-HP 11-19