HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual - Supporting F - Page 515
displays indicating that, is deprecated.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 515 highlights
portCmd 2 Examples To verify if packets can be sent to the destination IP address: switch:admin> portcmd --ping 3/ge0 -s 193.10.2.1 -d 193.10.2.49 Pinging 193.10.2.49 from ip interface 193.10.2.1 on 3/ge0 with 64 bytes of data Reply from 193.10.2.49: bytes=64 rtt=0ms ttl=64 Reply from 193.10.2.49: bytes=64 rtt=0ms ttl=64 Reply from 193.10.2.49: bytes=64 rtt=0ms ttl=64 Reply from 193.10.2.49: bytes=64 rtt=0ms ttl=64 Ping Statistics for 193.10.2.49: Packets: Sent = 4, Received = 4, Loss = 0 (0 percent loss) NOTE You must use --ping action; otherwise, if you use ping without the double-dash (--), a message displays indicating that ping is deprecated. To set the path characteristic to source mode on the remote host: switch:admin> portcmd --ipperf 4/ge0 -s 192.168.100.50 -d 192.168.100.0 -S ipperf to 192.168.100.40 from IP interface 192.168.100.50 on 4/0:3227 30s: BW:115.67MBps WBW(30s): 56.70MBps Loss(%):0.0 Delay(ms):2 PMTU:1500 NOTE You must use -- --ipperf; otherwise, if you use ipperf without the double-dash (--), a message displays indicating that ipperf is deprecated. See Also portCfg, portShow, Fabric OS Command Reference Manual 483 53-1000436-01