HP StorageWorks 2/32 Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 63
Configuring a syslog IP Address
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3 5. Click Apply. 6. Exit and relaunch Web Tools to continue working. Configuring a syslog IP Address The syslog IP represents the IP address of the server that is running the syslog process. The syslog daemon reads and forwards system messages to the appropriate log files and/or users, depending on the system configuration. When one or more IP addresses are configured, the switch forwards all error log entries to the syslog on the specified servers. Up to six servers are supported. See Fabric OS Administrator's Guide for more information on configuring the syslog daemon. When you configure a syslog IP address for a SilkWorm 24000 configured with two logical switches, it is on a logical-switch basis. This means that for each logical switch, you must configure a syslog IP address individually. To configure the syslog IP address 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Network tab (see Figure 3-2). 3. Enter a valid IP address in the New IP field (for example, 10.77.77.77). 4. Click Add. The configured IP is displayed in the Syslog IP window. 5. Click Apply. To remove a syslog IP address 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Network tab. 3. Select a syslog IP from the table and click Remove. 4. Optional: Click Clear All to remove all of the syslog IP addresses. 5. Click Apply. Web Tools Administrator's Guide 3-5 Publication Number: 53-0000194-01