HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.0.5d Release Notes (AA-RW1WF- - Page 4
Prerequisites and requirements, Firmware upgrade instructions, Documentation
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Prerequisites and requirements Table 1 summarizes current products running Fabric OS 5.0.5d firmware. The table lists the earliest recommended software versions. However, HP recommends using the latest supported software release versions to get the most benefit from the SAN. Table 1 Current supported Fabric OS versions Model Earliest version Recommended version Brocade 4Gb SAN Switch for HP c-Class BladeSystem 5.0.5 5.3.0 Brocade 4Gb SAN Switch for HP p-Class BladeSystem 5.0.0 5.3.0 HP StorageWorks Core Switch 2/64 HP StorageWorks SAN Director 2/128 4.1.0 4.2.0 5.0.5d 5.0.5d1 15.0.5d is for Chassis Config modes 3 and 4 only for the 2/128. For a list of retired products, visit the following HP website: http://h18004.www1.hp.com/storage/retiredproducts.html?jumpid=reg_R1002_USEN Firmware upgrade instructions To access the latest Fabric OS 5.0.5d firmware, configuration files and MIB files go to the following HP website: http://www.hp.com/go/san Navigate to the appropriate product under the B-Series Switches section. IMPORTANT: HP does not support upgrading from more than two previous releases. Documentation This release of Fabric OS is supported by the Fabric OS 5.0.1 documentation set. Access the most recent Fabric OS 5.0.1 documentation: http://www.hp.com/go/san 4