HP StorageWorks 2/8-EL SAN Switch 2/8 version 3.0.2k release notes - Page 6

Features Summary ■ hp StorageWorks Remote Switch Version 3.0.x/4.0.x User Guide, part number AA-RTS7B-TE ■ hp StorageWorks QuickLoop Version 3.0.x User Guide, part number AA-RTS1A-TE Soft copy of the hp StorageWorks SAN Switch 2/16 Version 3.0.x Installation Guide, part number AA-RR84B-TE, is also provided on the CD, which is shared with 2/8 SAN Switch products. For the latest supported configurations, please refer to the hp StorageWorks SAN Design Reference Guide, part number AA-RMPNF-TE, available at: http://h18006.www1.hp.com/storage/saninfrastructure.html Additional documentation, including white papers and best practices documents, are available via the HP website at: http://welcome.hp.com/country/us/eng/prodserv/storage.html Features Summary The following sections summarize the management features enabled on your specific switch model (SAN Switch 2/8 EL or SAN Switch 2/8 Power Pak). If You Purchased the SAN Switch 2/8 EL The SAN Switch 2/8 EL ships with the following features enabled: ■ Web Tools-Provides a graphical user interface (GUI) to monitor and manage the entire fabric. ■ Zoning-Allows partitioning of the SAN into logical groupings of devices that access each other. ■ IV_Domain_Fabric OS-Restricts the number of HP switches within a fabric to four. To upgrade to full fabric support, you must purchase the Full Fabric OS license, as listed in the Optional Upgrades section of these Release Notes. ■ QuickLoop (present on the switch, but not enabled)-Allows arbitrated loops to attach to a fabric. To enable, use the Web Tools QuickLoop Tab, or use the telnet qlPortEnable command. 6 SAN Switch 2/8 Version 3.0.2k Release Notes