HP StorageWorks 300 HP StorageWorks 300 Gateway Virtual Library System Install - Page 6

More help - virtual library

Page 6 highlights

13 Install cables on Switch 2824 1357 2468 9 1) Ethernet cable from NIC2 of primary node 2) Ethernet cable from NIC2 of 2nd node 3) Ethernet cable from NIC2 of 3rd node * 4) Ethernet cable from NIC2 of 4th node * 5) Ethernet cable from NIC2 of 5nd node * 6) Ethernet cable from NIC2 of 6th node * 7) Ethernet cable from NIC2 of 7th node * 8) Ethernet cable from NIC2 of 8th node * 9) Ethernet cable from port 24 of switch 2524 1. Ensure that the Ethernet cables from the NIC2 ports of each node are firmly set in the appropriate ports. 2. Connect one end of an Ethernet cable to port 24 of Switch 2824. Connect the other end of the Ethernet cable to port 24 of Switch 2524. 3. Connect a power cable to the front of the switch, run the cable through the holes in the rack to the back of the rack, then connect the cable to a PDU. 14 Install cables on Switch 2524 123 456 26 78 9 1) Ethernet cable from USB adapter on primary node 2) Ethernet cable from USB adapter on 2nd node 3) Ethernet cable from USB adapter on 3rd node* 4) Ethernet cable from USB adapter on 4th node* 5) Ethernet cable from USB adapter on 5th node* 6) Ethernet cable from USB adapter on 6th node* 7) Ethernet cable from USB adapter on 7th node* 8) Ethernet cable from USB adapter on 8th node* 9) Ethernet cable from port 24 of switch 2824 * (if present) 1. Ensure that the Ethernet cables from the NIC2 ports of each node are firmly set in the appropriate ports. 2. Ensure that one end of an Ethernet cable is connected to port 24 or Switch 2824 and that the other end is connected to port 24 of Switch 2524. 3. Locate the power cable connected to the Switch in step 11. Connect the other end of the power cable to a PDU. 15 Finishing the installation The hardware installation is now complete. Continue the overall installation by configuring the identities of each node. Begin at Multi-node setup in the HP StorageWorks 300 Gateway Virtual Library System user guide. More help If you cannot find the information that you need in this overview, there are several other resources that you can use to get more detailed information. • The HP StorageWorks 300 Virtual Library System user guide • The HP website, http://www.hp.com • Your nearest HP authorized reseller (locations and telephone numbers of these resellers are given on the HP website) • HP technical support telephone numbers: - In North America, 1-800-633-3600 - For other regions, telephone numbers are given on the HP website. Printed on at least 50% total recycled fiber with at least 10% post-consumer paper © Copyright 2006 Hewlett-Packard Development Company, L.P. First edition (November 2006) Printed in the US. www.hp.com Part no. AH138-96001 *AH138-96001* AH138-96001

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

1. Ensure that the Ethernet cables from the NIC2 ports
of each node are firmly set in the appropriate ports.
2. Ensure that one end of an Ethernet cable is
connected to port 24 or Switch 2824 and that the
other end is connected to port 24 of Switch 2524.
3. Locate the power cable connected to the Switch in
step 11.
Connect the other end of the power cable
to a PDU.
1) Ethernet cable from USB adapter on primary
node
2) Ethernet cable from USB adapter on 2nd node
3) Ethernet cable from USB adapter on 3rd node*
4) Ethernet cable from USB adapter on 4th node*
5) Ethernet cable from USB adapter on 5th node*
6) Ethernet cable from USB adapter on 6th node*
7) Ethernet cable from USB adapter on 7th node*
8) Ethernet cable from USB adapter on 8th node*
9) Ethernet cable from port 24 of switch 2824
Install cables on Switch 2524
14
26
1
2
3
4
5
6
9
8
7
The hardware installation is now complete.
Continue the
overall installation by configuring the identities of each
node. Begin at Multi-node setup in the
HP StorageWorks
300 Gateway Virtual Library System user guide
.
Finishing the installation
15
*AH138-96001*
AH138-96001
More help
Printed on at least 50% total recycled fiber
with at least 10% post-consumer paper
© Copyright 2006 Hewlett-Packard Development Company, L.P.
First edition (November 2006)
Printed in the US.
www.hp.com
Part no. AH138-96001
If you cannot find the information that you need in
this overview, there are several other resources that
you can use to get more detailed information.
• The
HP StorageWorks 300 Virtual Library System
user guide
• The HP website, http://www.hp.com
• Your nearest HP authorized reseller (locations
and telephone numbers of these resellers are
given on the HP website)
• HP technical support telephone numbers:
— In North America, 1-800-633-3600
— For other regions, telephone numbers are
given on the HP website.
1) Ethernet cable from NIC2 of primary node
2) Ethernet cable from NIC2 of 2nd node
3) Ethernet cable from NIC2 of 3rd node *
4) Ethernet cable from NIC2 of 4th node *
5) Ethernet cable from NIC2 of 5nd node *
6) Ethernet cable from NIC2 of 6th node *
7) Ethernet cable from NIC2 of 7th node *
8) Ethernet cable from NIC2 of 8th node *
9) Ethernet cable from port 24 of switch 2524
1. Ensure that the Ethernet cables from the NIC2 ports
of each node are firmly set in the appropriate ports.
2. Connect one end of an Ethernet cable to port 24 of
Switch 2824. Connect the other end of the Ethernet
cable to port 24 of Switch 2524.
3. Connect a power cable to the front of the switch, run
the cable through the holes in the rack to the back of
the rack, then connect the cable to a PDU.
*
(if present)
Install cables on Switch 2824
13
1
3
5
7
2
4
6
8
9