HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual v6.2.0 (53-10 - Page 667
To display ISCSI Port WWN and Sessions
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 667 highlights
portShow 2 Interface IP Address NetMask MTU 3 192.168.60.103 255.255.255.0 1700 Interface IP Address NetMask MTU 4 192.168.60.104 255.255.255.0 1400 Interface IP Address NetMask MTU 5 192.168.60.105 255.255.255.0 2000 Interface IP Address NetMask MTU 6 192.168.60.106 255.255.255.0 1300 Interface IP Address NetMask MTU 7 192.168.60.107 255.255.255.0 2200 To display IP routes with IPv4 addresses on a GbE port: switch:admin> portshow iproute ge0 GE Port 0/ge0 IP Address Mask Gateway Metric Flags 192.168.255.0 255.255.255.0 192.168.255.20 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.21 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.22 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.23 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.28 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.26 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.27 0 Interface, 172.16.123.231 255.255.0.0 192.168.255.25 1 To display ISCSI Port WWN and Sessions: switch:admin> portshow iscsi 2/ge0 GE Port 2/ge0 Port WWN Sessions 50:06:06:9e:40:09:a2:00 0 To display the connection parameter information for all FCIP tunnels on the switch and to show the current DiffServ markings being used for data connection as well as control connection (The following example displays high water marks in bold for the data and control TCP connections of Tunnel 0): switch:admin> portshow fciptunnel -all -params Port: ge0 Tunnel ID 0 Tunnel Description "This is a test Description of this tunnel" Remote IP Addr 192.168.10.2 Local IP Addr 192.168.44.9 Remote WWN Not Configured Local WWN 10:00:00:05:1e:38:84:65 Compression off Fastwrite off Tape Pipelining off Committed Rate 900000 Kbps (0.900000 Gbps) SACK on Min Retransmit Time 100 Fabric OS Command Reference 639 53-1001186-01