HP StorageWorks 4/256 Brocade Fabric OS Message Reference Supporting Fabric OS - Page 421
SEC System Messages, SEC-1001
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
Chapter SEC System Messages 66 SEC-1001 Message , [SEC-1001], ,, ERROR, , RCS process fails: Probable Cause Indicates that the reliable commit service (RCS) process fails to complete. RCS is a mechanism for transferring data from one switch to other switches within the fabric. RCS ensures that either all or none of the switches commit to the database. RCS can fail if one switch in the fabric is busy or in an error state that prevents it from accepting the database. Recommended Action RCS process is evoked when the security database is modified by a security command (for example, secPolicySave, secPolicyActivate, or secVersionReset). If the switch is busy, the command might fail the first time. Retry the command. Run the rcsInfoShow command to view RCS capability on the fabric. RCS must be capable on all switches in the fabric to be enabled. If all switches are capable, RCS is automatically enabled. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1002 Message , [SEC-1002], ,, ERROR, , Security data fails: . Probable Cause Indicates that the receiving switch fails to validate the security database sent from the primary fabric configurations server (FCS) switch. This might be caused by several factors: the data package may be corrupted, the time stamp on the package may be out of range as a result of replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure may result from an internal error, such as losing the primary public key or an invalid database. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in Ready state. If a switch is in the error state, the database might not be correctly updated for that switch. The error might also be a result of an internal corruption or a hacker attack to the secure fabric. If you have reason to believe that the error is the result of a possible security breach, take appropriate action as defined by your enterprise security policy. Severity ERROR Fabric OS Message Reference 369 53-1000600-01