HP StorageWorks 4/256 Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 242
connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21, Return value = 07F
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
8 connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 If this is not applicable, return all bits set to 0. Return value = 07F The bits have the following definition: • 0 = unknown • 1 = Loop • 2 = Fabric • 4 = SCSI • 8 = TCP/IP • 16 = VI • 32 = FICON connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 Not supported in Fabric OS v2.6.1. This is the bit mask that specifies the driver level protocol(s) that are currently operational. Return value = 07F If this is not applicable, return all bits set to zero. The bits have the following definition: • 0 = unknown • 1 = Loop • 2 = Fabric • 4 = SCSI • 8 = TCP/IP • 16 = VI • 32 = FICON connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 Not supported in Fabric OS v2.6.1. The node World Wide Name of the port, if applicable; otherwise, an empty string. All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity. All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN. This is in IEEE Extended format and the extension contains the internal port number of each port. The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port number 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. 226 Fabric OS MIB Reference 53-1000439-01