HP StorageWorks 4/256 Brocade Fabric OS MIB Reference v6.3.0 (53-1001339-01, J - Page 166
swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
5 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 The operational status of the flash. This OID cannot be used for either Firmwaredownload or Configdownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always "swCurrent (1)". swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 Values The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. This OID is writeable only in Fabric OS v2.6.x and v3.x. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always "swCurrent (1)".This is not supported in v6.0.0 and higher versions. Possible values are: • swCurrent (1) The flash contains the current firmware image or configuration file. • swCfUpload (3) The switch configuration file is to be uploaded to the host specified. • swCfDownload (4) The switch configuration file is to be downloaded from the host specified. • swFwCorrupted (5) The firmware in the flash is corrupted. This value is for informational purposes only; however, setting swFlashDLAdmStatus to this value is not allowed. For more information about the firmwareDownload, configDownload and configUpload commands, refer to the Fabric OS Command Reference. swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 The name or IP address (in dot notation) of the host to download or upload a relevant file to the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions. swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 The user name is used on the host for downloading or uploading a relevant file, to or from the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions. swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 The name of the file to be downloaded or uploaded. 148 Fabric OS MIB Reference 53-1001339-01