HP StorageWorks 4/256 HP StorageWorks Fabric OS 5.3.x administrator guide (569 - Page 442
Zone name restrictions, Enabling and disabling interoperability mode, To enable interoperability mode
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 442 highlights
You can use the cfgSize command to check both the maximum available size and the currently saved size. If you believe you are approaching the maximum, you can save a partially completed zoning configuration and use the cfgSize command to determine the remaining space Zone name restrictions The name field must contain the ASCII characters that actually specify the name, not including any required fill bytes. Names must follow these rules: • Length must be between 1 and 64 characters. • All characters must be 7-bit ASCII. • The first character must be a letter, which can be either upper case (A-Z) or lower case (a-z). • Any character other than the first character must be lower case (a-z), upper case (A-Z), a single-digit number (0-9), dash (-), or underscore (_). Enabling and disabling interoperability mode Before enabling interoperability mode, inspect the individual fabrics for compatibility. • Make sure that zones meet the zone criteria and restrictions listed in "Zoning restrictions" on page 443). • Use the msplMgmtDeactivate command to disable any platform management functions. (Refer to the Fabric OS Command Reference Manual for additional command information). To enable interoperability mode 1. Verify that you have implemented all the prerequisites necessary to enable interoperability mode on the fabric (refer to "Configuration recommendations" and "Configuration restrictions" on page 442. 2. Connect to the switch and log in as admin. 3. Enter the switchDisable command to disable the switch. 4. Use the configure command to set the domain ID to a number in the range from 97 to 126. (For detailed instructions, refer to "Working with domain IDs" on page 40.) 5. Enter the interopmode 1 command to enable interoperability. This command resets a number of parameters and enables interactive mode. 6. You must reboot the switch after changing the interoperability mode: switch:admin> switchdisable switch:admin> configure Configure... Fabric Parameters (yes, y, no, n): [no] y Domain (1...239): [1] 97 ... switch:admin> interopmode 1 Please make sure the MS Platform service is disabled. Please run "msPlMgmtDeactivate" command to disable the Platform service. The switch effective configuration will be lost when the operating mode is changed; do you want to continue? (yes, y, no, n): [no] y Interopmode is enabled Note: You must reboot this switch for the new change to take effect. switch:admin> 7. Repeat step 2 through step 6 on all HP StorageWorks switches in the fabric. 8. Enable interoperability on each non-HP StorageWorks switch (refer to the switch documentation). 9. After enabling interoperability mode on all switches, physically connect the non-HP StorageWorks switches into the fabric, one at a time. To disable interoperability mode 1. Connect to the switch and log in as admin. 2. Enter the switchDisable command to disable the switch. 444 Configuring McData Open Fabric mode
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
-
428
-
429
-
430
-
431
-
432
-
433
-
434
-
435
-
436
-
437
-
438
-
439
-
440
-
441
-
442
-
443
-
444
-
445
-
446
-
447
-
448
-
449
-
450
-
451
-
452
-
453
-
454
-
455
-
456
-
457
-
458
-
459
-
460
-
461
-
462
-
463
-
464
-
465