HP StorageWorks 4/32 Brocade Fabric OS Command Reference Guide v6.0.0 (53-1000 - Page 240
To download SAS firmware and remove the installed SA image at the same time
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
2 firmwareDownload Protocol selected: USB Trying address-->AF_INET IP: 127.1.1.8, flags : 2 System settings check passed. Checking version compatibility... Version compatibility check passed. This command will upgrade the firmware on both CP blades. If you want to upgrade firmware on a single CP only, please use -s option. You may run firmwaredownloadstatus to get the status of this command. This command will cause a warm/non-disruptive boot on the active CP, but will require that existing telnet, secure telnet or SSH sessions sessions be restarted. To download SAS firmware interactively: switch:admin> firmwaredownload Type of Firmware (FOS, SAS, or any application) [FOS]:SAS Target Slots (all, or slot numbers) [all]: Server Name or IP Address: 192.168.32.10 Network Protocol (1-auto-select, 2-FTP, 3-SCP) [1]: User Name: userfoo File Name: /home/userfoo/dist/release.plist Password: To download SAS firmware without version compatibility checking: switch:admin> firmwaredownload -c Type of Firmware (FOS, SAS, or any application name) [FOS]: sas Targeted Slots (slot numbers): 8 Server Name or IP Address: 192.168.126.250 Network Protocol (1-auto-select, 2-FTP, 3-SCP) [1]: User Name: userfoo File Name: /home/userfoo/dist Password: Verifying the system parameters for firmwaredownload... System parameters checking passed. Checking version compatibility... Version compatibility checking DISABLED. This command will reboot the selected blades and disrupt the virtualization applications on these blades. WARNING: YOU HAVE ELECTED TO DISABLE THE VERSION COMPATIBILITY CHECKING FEATURE. THIS CAN CAUSE THE VIRTUALIZATION SERVICES TO STOP WORKING. If you want to check the version compatibility, please exit and re-enter this command without the "-c" option. Do you want to continue [Y]: y To download SAS firmware and remove the installed SA image at the same time: switch:admin> firmwaredownload -a sas -e 192.168.126.250,\ userfoo,/home/userfoo/dist/release.plist,12345 This command will download "sas" and at the same time, it will remove all of the installed SA images on the switch. 214 Fabric OS Command Reference 53-1000599-01