HP StorageWorks 4/64 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 98
Use this command to set the priorities on which FCoE traffic will be allowed.
![]() |
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5 lldp fcoe-priority-bits lldp fcoe-priority-bits Sets the priorities on which FCoE traffic will be allowed. Synopsis lldp fcoe-priority-bits value no lldp fcoe-priority-bits Operands value Specifies the bitmap value. The range of valid values is 0x0-0xff. Defaults The default value is 0x08. Command Interface configuration mode Modes Description Use this command to set the priorities on which FCoE traffic will be allowed. The no lldp fcoe-priority-bits command returns to the default setting. Usage There are no usage guidelines for this command. Guidelines Examples To set the priorities on which FCoE traffic will be allowed: switch(conf-if-te-0/1)#lldp fcoe-priority-bits 0xff See Also protocol lldp 80 Converged Enhanced Ethernet Command Reference 53-1001347-01
![](/manual_guide/products/hewlettpackard-am866a-brocade-converged-enhanced-ethernet-command-reference-v630-53100134701-2009-a26c65e/98.png)