HP StorageWorks 4/64 Brocade Fabric OS Message Reference Supporting Fabric OS - Page 573
Table 10, Table 9
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 573 highlights
86 SULB-1009 TABLE 9 Status Messages and Status Codes Status Message Status Code "firmwareRestore is entered. System will reboot and a firmwareCommit operation will start 0xa8 upon boot up." "Switch is relocating the AP image." 0xa9 "The AP image is relocated successfully." 0xaa "Switch reboots during relocating the AP image. The operation will be restarted." 0xab "Blade failed to reboot with the original image. firmwareRestore command failed." 0xac Table lists additional firmwareDownload error messages and error codes. They provide more details on why firmwareDownload failed. TABLE 10 Error Messages and Error Codes Error Message Error Code "Image is up-to-date. No need to download the same version of firmware." 0xF "Upgrade is inconsistent. Run the bootEnv (root) command to correct the inconsistency before 0x10 proceeding." "OSRootPartition is inconsistent. Run the bootEnv (root) command to correct the inconsistency 0x11 before proceeding. For example: swap OSRootPartitions and reboot." "Unable to access the required package list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package." 0x15 "Unable to create firmware version file." 0x16 "Unexpected system error." 0x17 "Error in getting lock device for firmwareDownload." 0x18 "Error in releasing lock device for firmwareDownload." 0x19 "firmwareCommit failed." 0x1a "Firmware directory structure is not compatible. Check whether the firmware is supported on this platform." 0x1b "Failed to load the Linux kernel image." 0x1c "OSLoader is inconsistent. Run the bootEnv (root) command to correct the inconsistency before 0x1d proceeding." "New image has not been committed. Run firmwareCommit or firmwareRestore first and then 0x1e try firmwareDownload." "firmwareRestore failed." 0x1f Fabric OS Message Reference 521 53-1000600-01