HP StorageWorks 4/64 Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 242
The Link Failure protocol., Enabling a port's transceiver.
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
8 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 • bypassConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific "bypass" operation. Examples of these operations are: - Transitioning from online to offline. - A request (NON-PARTICIPATING) command to the loop port state machine. - Removal of the port from an arbitrated loop by a hub. • unbypassConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific "unbypass" operation. Examples of these operations are - The Link Failure protocol. - A request (PARTICIPATING) command to the loop port state machine. - Addition of the port to an arbitrated loop by a hub. • offlineConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific offline operation. Examples of these operations are: - Disabling a port's transceiver. - The Link Failure protocol. - Request (NON-PARTICIPATING) command to the loop port state machine removal of the port from an arbitrated loop by a hub. • onlineConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific online operation. Examples of these operations are: - Enabling a port's transceiver. - The Link Failure protocol, request (PARTICIPATING) command to the loop port state machine. - Addition of the port from an arbitrated loop by a hub. Each implementation might choose not to allow any or all of these values on a SET. If the management station uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch: • Disabling the FC port that is connected to the management station • Disabling the embedded port 224 Fabric OS MIB Reference 53-1000602-01