HP StorageWorks 4/64 Brocade Fabric OS MIB Reference Guide v6.1.0 (53-1000602- - Page 28
Fabric OS Commands for Configuring SNMP, Support for Administrative Domains, Support for Role Based
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 Fabric OS Commands for Configuring SNMP Fabric OS Commands for Configuring SNMP Use the following commands to configure MIBs in the Fabric OS. Refer to the Fabric OS Administrator's Guide for procedures for configuring SNMP on the Brocade switches. TABLE 4 Commands for Configuring SNMP Command Description snmpConfig snmpMibCapSet snmpMibCapShow agtcfgDefault agtcfgSet agtcfgShow SNMPMibCapSet SNMPMibCapShow This command has all the features of the existing the agtcfg* commands; in addition, it has SNMPv3 configuration parameters. Enhanced in Fabric OS v4.4 to provide a filter facility at the trap level (previously the filter facility was at MIB level for traps). Enhanced in Fabric OS 5.3.0 to support enabling and disabling of MIBs and traps for the FCIP MIB and the ifTable and ifXTable for FC ports (MIB II Intefaces group). Displays the snmpMibCapSet command settings. This command is deprecated.Only the snmpConfig command is working. This command is deprecated.Only the snmpConfig command is working. This command is deprecated.Only the snmpConfig command is working. This command is deprecated.Only the snmpConfig command is working. This command is deprecated.Only the snmpConfig command is working. Support for Administrative Domains Administrative Domains are supported in Fabric OS Version 5.3.0 and later releases. An Administrative Domain (AD) is a domain within a fabric. Administrative domains can be used to limit administrator access within a fabric, and to provide service providers with a means to assign portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD may also limit access to a configured set of users. Support for Role Based Access Control Role Based Access Control (RBAC) is supported in Fabric OS Version 5.3.0 and later releas RBAC applies a fixed set of roles that address the access control needs of a majority of customers. Each role is a set of permissions that can be applied to a user that controls the kinds of jobs and tasks the user can perform on a fabric or fabric element. Support for IP V6 Addressing IP V6 addressing is supported in Fabric OS Version 5.3.0 and later releases. 12 Fabric OS MIB Reference 53-1000602-02