HP StorageWorks 4/64 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 249
Editing a discovery domain, Discovery domain sets (DDSet)
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Discovery domain sets (DDSet) 15 Editing a discovery domain Use the following procedure to edit a discovery domain. 1. Open iSCSI Target Gateway Admin as described on page 206. 2. Select the Discovery Domains tab. 3. Select a DD in the left pane and click Edit. 4. Select virtual targets and use the buttons to add or remove them from the DD. 5. Click Next. The opening screen with a list of virtual targets that you added to your DDs is displayed. 6. Click Next. You can verify the virtual targets that you added to your DDs. 7. Click Finish. You can confirm the changes that you made before committing them. Discovery domain sets (DDSet) The iSCSI Target Gateway Admin module provides the flexibility to create discovery domain sets (DDSet) that define the host target access. (This functionality is similar to Fibre Channel zoning.) Use the Discovery Domains tab to view and manage access from iSCSI initiators to iSCSI virtual targets. The DD view displays all DDSets created and allows you to create, edit, enable, or disable a discovery domain set. Select a DDSet from the left pane to view the contents of the set. Discovery domains can be created but they do not have to be associated with a DDSet. However, a DDSet cannot be created without having at least one discovery domain associated in it. Only floating discovery domains are allowed. NOTE You can only rename a discovery domain or discovery domain set from the iSCSI Usability wizard. Creating a discovery domain set Use the following procedure to create a discovery domain set. 1. Open iSCSI Target Gateway Admin as described on page 206. 2. Select the Discovery Domains tab. 3. Click Create DDSet. The Create DDSet wizard opens. Web Tools Administrator's Guide 217 53-1001343-01