HP StorageWorks 4/8 HP StorageWorks Fabric OS 6.2.0e release notes (5697-0354, - Page 15
Power supply requirements for Director blades, Fibre Channel Routing scalability
View all HP StorageWorks 4/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Power supply requirements for Director blades Table 4 lists power supply requirements for Director blades to provide full redundancy (220 VAC power is assumed). IMPORTANT: Director blades must meet minimum Fabric OS levels to operate in the Director chassis. For example, the FC8-32 is not supported in the 4/256 SAN Director with Fabric OS 6.0.x. Table 4 Power supplies required for blades in Director chassis Director blade 4/256 SAN Director FC4-16 FC4-32 FC4-48 FC8-16 FC8-32 Two power supplies DC SAN Backbone Director and DC04 SAN Director1 Two power supplies FC8-48 FC10-6 Four power supplies Two power supplies FR4-18i (FCIP/FC Router blade) Four power supplies FC4-16IP (iSCSI blade) Two power supplies. The FC4-16IP blades are not supported in the DC SAN Backbone Director and DC04 SAN Director. FS8-18 (DC Switch Encryption FC blade) Not supported Two power supplies. Requires 220 VAC in the DC04 SAN Director. 1The DC Director can operate with nominal power of 110 VAC. See the appropriate hardware reference guide for power specifications. Fibre Channel Routing scalability For the latest Fibre Channel Routing (FCR) scalability support information, see the HP StorageWorks SAN design reference guide, available at: http://www.hp.com/go/sandesignguide HP StorageWorks Fabric OS 6.2.0e release notes 15