HP StorageWorks 4000/6000/8000 .HP StorageWorks SAN Design Reference Guide, Pa - Page 317

Requirements, Feature, The connection to the 400 MP Router and MP Router Blade FCIP port must be GbE

Page 317 highlights

Feature IP network protocols Storage systems FCIP-supported operating systems Documentation Requirements TCP/IP IPv4, Ethernet 10 Mb/s, 100 Mb/s, and 1,000 Mb/s All 400 MP Router and MP Router Blade FCIP implementations must have dedicated IP bandwidth. HP does not support 400 MP Router or MP Router Blade configurations with FCIP tunnels configured with nondedicated bandwidth. For more information, see "Configuring and monitoring FCIP extension services" in the HP StorageWorks Fabric OS 6.x administrator guide. For more information on dedicated IP bandwidth requirements. see Table 157 and Table 161. Notes: • XP Continuous Access storage systems require a minimum of 16 Mb/s IP bandwidth. FCIP is supported with IPsec data encryption (license required) or FCIP FastWrite acceleration. This requires a minimum of firmware 5.2.0a. For firmware version 6.3.x, version 6.3.0c or later is required for FCIP FastWrite. • IPsec and FCIP FastWrite are mutually exclusive and cannot be configured simultaneously. • The connection to the 400 MP Router and MP Router Blade FCIP port must be GbE compatible. Continuous Access EVA Continuous Access XP20000/24000, XP10000/12000, XP128/1024, XP48/512 See "Heterogeneous server rules" on page 185 for operating system support. FCIP FastWrite is supported with XP Continuous Access and is not supported with Continuous Access EVA. Note: Use aptpolicy = 1 (port-based routing) and DLS = 0FF (dynamic load sharing) with B-series switches, 400 MP Routers, or MP Router Blades using Continuous Access EVA. XP Continuous Access supports aptpolicy = 1 and aptpolicy = 3 (exchange-based routing) (see Table 176 on page 349). For Continuous Access EVA, see the HP StorageWorks Enterprise Virtual Array compatibility reference matrix at http://h18006.www1.hp.com/products/storage/ software/conaccesseva/index.html. For information about the 400 MP Router and MP Router Blade, see the SAN Infrastructure website: http://h18006.www1.hp.com/storage/saninfrastructure/index.html. SAN Design Reference Guide 317

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386
  • 387
  • 388
  • 389
  • 390
  • 391
  • 392
  • 393
  • 394
  • 395
  • 396
  • 397
  • 398
  • 399
  • 400
  • 401
  • 402
  • 403
  • 404
  • 405
  • 406
  • 407
  • 408
  • 409
  • 410
  • 411
  • 412
  • 413
  • 414
  • 415
  • 416
  • 417
  • 418
  • 419
  • 420
  • 421
  • 422
  • 423
  • 424
  • 425
  • 426
  • 427
  • 428
  • 429
  • 430
  • 431
  • 432
  • 433
  • 434
  • 435
  • 436
  • 437
  • 438
  • 439
  • 440
  • 441
  • 442
  • 443
  • 444
  • 445
  • 446
  • 447
  • 448
  • 449
  • 450
  • 451
  • 452
  • 453
  • 454
  • 455
  • 456

Requirements
Feature
TCP/IP IPv4, Ethernet 10 Mb/s, 100 Mb/s, and 1,000 Mb/s
All 400 MP Router and MP Router Blade FCIP implementations must have dedicated IP
bandwidth. HP does not support 400 MP Router or MP Router Blade configurations with
FCIP tunnels configured with nondedicated bandwidth. For more information, see
Configuring and monitoring FCIP extension services
in the
HP StorageWorks Fabric
OS 6.x administrator guide
.
For more information on dedicated IP bandwidth requirements. see
Table 157
and
Table
161
.
Notes:
XP Continuous Access storage systems require a minimum of 16 Mb/s IP bandwidth.
FCIP is supported with IPsec data encryption (license required) or FCIP FastWrite
acceleration. This requires a minimum of firmware 5.2.0a. For firmware version
6.3.
x
, version 6.3.0c or later is required for FCIP FastWrite.
IPsec and FCIP FastWrite are mutually exclusive and cannot be configured simultan-
eously.
The connection to the 400 MP Router and MP Router Blade FCIP port must be GbE
compatible.
IP network protocols
Continuous Access EVA
Continuous Access XP20000/24000, XP10000/12000, XP128/1024, XP48/512
See
Heterogeneous server rules
on page 185 for operating system support.
FCIP FastWrite is supported with XP Continuous Access and is not supported with
Continuous Access EVA.
Note:
Use aptpolicy = 1 (port-based routing) and DLS = 0FF (dynamic load sharing) with
B-series switches, 400 MP Routers, or MP Router Blades using Continuous Access EVA.
XP Continuous Access supports aptpolicy = 1 and aptpolicy = 3 (exchange-based routing)
(see
Table 176
on page 349).
Storage systems
For Continuous Access EVA, see the
HP StorageWorks Enterprise Virtual Array
compatibility reference
matrix at
h
t
tp://h18
006
.w
w
w1.hp
.co
m/pr
odu
c
ts/s
t
o
r
age/
s
o
f
t
w
ar
e/co
nacce
s
s
e
v
a/inde
x
.h
tml
.
FCIP-supported operating systems
For information about the 400 MP Router and MP Router Blade, see the SAN Infrastructure
website:
h
t
tp://h18
006
.w
w
w1.hp
.co
m/s
t
o
r
age/s
aninf
r
a
s
tr
u
c
tur
e/inde
x
.h
tml
.
Documentation
SAN Design Reference Guide
317