HP StorageWorks 4000 Compaq StorageWorks Fibre Channel Troubleshooting Guide - Page 39
Installing Compaq Fibre Channel Diagnostics for Windows CE
View all HP StorageWorks 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Diagnostics 3-3 I Tape Drive Test Unit Ready: queries the changer to see if a good status is returned Buffer Test: writes and reads from the tape drive's onboard cache Firmware Upgrade: will upgrade the firmware of the tape drive I FCTC Firmware Upgrade: will upgrade the firmware of the FCTC and the FCTC II Installing Compaq Fibre Channel Diagnostics for Windows CE Compaq Fibre Channel Diagnostics for Windows CE is available on the SmartStart and Support Software CD. It is bundled with the Compaq Diagnostics for Windows 95/98. Create the installation diskettes by following the SmartStart instructions. To install the utility: 1. Remove all previous versions of Compaq Diagnostics for Windows 95/98. a. Select Start, Settings, Control Panel. b. Select Add/Remove Programs. c. Select Compaq Diagnostics for Windows 95/98 and "Add/Remove." 2. Install this version of Diagnostics for Windows 95/98. a. Insert diskette #1 into drive A: b. Run A:\SETUP.EXE c. Select Next. d. Select Finish. 3. Copy the FCDIAGCE.EXE file located in the CPQDIAGS directory.