HP StorageWorks 70 MSA6X/7X Series Enclosure Riser Board Replacement Instructi - Page 2
Installing the riser board, Verifying component replacement - rack
View all HP StorageWorks 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4. Loosen the thumbscrew (1) and lift the board out of the chassis (2). Installing the riser board To install the board, reverse the removal procedure: 1. Attach the board to the chassis, securing it with the thumbscrew. 2. Install the access panel. 3. Insert the enclosure into the rack and power up the enclosure. Verifying component replacement Be sure there is power to the 7-segment display board
4.
Loosen the thumbscrew (1) and lift the board out of the
chassis (2).
Installing the riser board
To install the board, reverse the removal procedure:
1.
Attach the board to the chassis, securing it with the
thumbscrew.
2.
Install the access panel.
3.
Insert the enclosure into the rack and power up the
enclosure.
Verifying component replacement
Be sure there is power to the 7-segment display board