Home » HP Manuals » Storage Devices » HP StorageWorks 8/20q » Manual Viewer

HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch installation - Page 43

con d with System Type set

View all HP StorageWorks 8/20q manuals

Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

The following example configures SNMP trap 1: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set setup snmp trap 1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: Trap1Enabled Trap1Address Trap1Port Trap1Severity Trap1Version Trap1Community False 10.0.0.254 162 warning 2 public New Value (press ENTER to not specify value, 'q' to quit): Trap1Enabled (True / False) :True Trap1Address (hostname, IPv4, or IPv6 Address) :10.20.30.40 Trap1Port (decimal value, 1-65535) : Trap1Severity (select a severity level) 1=unknown 6=warning 2=emergency 7=notify 3=alert 8=info 4=critical 9=debug 5=error 10=mark :4 Trap1Version (1 / 2) :1 Trap1Community (string, max=32 chars) :OSEMcommunity Do you want to save and activate this snmp setup? (y/n): [n] For more information about CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 4. Configure the switches in OSEM by adding each 8/20q Fibre Channel Switch as a Managed System configured with System Type set to FC Switch and the IP address for the switch. For detailed instructions, see the OSEM documentation available at the web sites listed in "Installation instructions and documentation for SIM, RSP, OSEM, and ISEE" on page 41. 8/20q Fibre Channel Switch installation and reference guide 43

Section	Page
Contents	3
About this guide	7
Intended audience	7
Related documentation	7
Document conventions and symbols	8
Table 1 Document conventions	8
Rack stability	9
HP technical support	9
Customer self repair	9
Product warranties	9
Subscription service	9
HP web sites	10
Documentation feedback	10
General description	11
Figure 1 8/20q Fibre Channel Switch	11
Switch LEDs and controls	12
Figure 2 Switch LEDs and controls	12
Input power LED (green)	12
Heartbeat LED (green)	12
System fault LED (amber)	12
Maintenance button	13
Resetting a switch	13
Placing the switch in maintenance mode	13
Fibre Channel ports	14
Figure 3 Fibre Channel ports	14
Port LEDs	14
Figure 4 Port LEDs	14
Port Logged-in LED (green)	14
Port Activity LED (green)	15
Transceivers	15
Port types	15
Ethernet port	16
Figure 5 Ethernet port	16
Serial port	16
Figure 6 Serial port and pin identification	16
Table 2 Serial port pin identification	17
Power supply and fans	17
Switch management	17
QuickTools web applet	18
Simple SAN Connection Manager	18
Command line interface	18
Simple Network Management Protocol	18
Storage Management Initiative-Specification (SMI-S)	18
File transfer protocols	18
Planning	19
Devices	19
Device access	19
Table 3 Zoning database limits	20
Performance	20
Distance	20
Bandwidth	20
Latency	21
Table 4 Port-to-port latency	21
Feature licenses	21
Multiple switch fabrics	21
Optimizing device performance	21
Domain ID, principal priority, and domain ID lock	22
Common topologies	22
Switch services	22
Security	24
User account security	24
IP security	24
Port binding	24
Connection security	24
Device security	25
Fabric management	26
Installation	27
Site requirements	27
Management Station and Workstation requirements	27
Table 5 Management station requirements for Simple SAN Connection Manager	27
Table 6 Workstation requirements for QuickTools	28
Switch power requirements	28
Environmental conditions	28
Installing a switch	28
Mount the switch	29
Before you begin	29
Collect the required items	30
Verify the kit contents	30
Table 7 8/20q Fibre Channel Switch rack mount kit hardware	30
Rack the switch	31
Figure 7 Attaching the rails to the switch	31
Figure 8 Installing the rear mounting brackets	31
Figure 9 Installing the switch and rail assembly	31
Figure 10 Fastening the rail to the front of the rack	32
Figure 11 Fastening the rail to the rear mounting bracket	32
Figure 12 Installing the filler panel	32
Install the transceivers	33
Configure the workstation	33
Configuring the workstation IP address for Ethernet connections	33
Configuring the workstation serial port	33
Apply power to the switch	34
Connect the management station or workstation to the switch	35
Figure 13 Management station and workstation cable connections	35
Configure the switch	35
Simple SAN Connection Manager switch configuration	35
QuickTools switch configuration	35
CLI switch configuration	36
Cable devices to the switch	36
Installing firmware	36
Using QuickTools to install firmware	37
Using the CLI to install firmware	37
One-step firmware installation	38
Custom firmware installation	39
Adding a switch to an existing fabric	39
Installing feature license keys	40
Configuring Call Home to HP Services (optional)	40
Role of the Remote Support Software Manager	40
Role of OSEM and versions required	40
Installation instructions and documentation for SIM, RSP, OSEM, and ISEE	41
RSP requirements for the CMS	41
Infrastructure requirements for implementing Call Home to HP Services	42
Configuring Call Home to HP services	42
Diagnostics and troubleshooting	45
Switch diagnostics	45
Figure 14 Switch LEDs	45
Input power LED is extinguished	45
System fault LED is illuminated	46
Power-On self test diagnostics	46
Heartbeat LED blink patterns	46
Internal firmware failure blink pattern	46
Fatal POST error blink pattern	47
Configuration file system error blink pattern	47
Over-temperature blink pattern	47
Logged-in LED indications	48
Figure 15 Logged-in LED	48
E_Port isolation	48
Excessive port errors	49
Recovering a switch using maintenance mode	50
Exiting the maintenance menu (option 0)	51
Unpacking a firmware image file in maintenance mode (option 1)	51
Resetting the network configuration in maintenance mode (option 2)	51
Resetting user accounts in maintenance mode (option 3)	51
Copying log files in maintenance mode (option 4)	52
Removing the switch configuration in maintenance mode (option 5)	52
Remaking the file system in maintenance mode (option 6)	52
Resetting the switch in maintenance mode (option 7)	52
Updating the boot loader in maintenance mode (option 8)	52
Regulatory compliance and safety	53
Regulatory compliance	53
Federal Communications Commission notice for Class A equipment	53
Cables	53
Laser device	53
Laser safety warning	53
Certification and classification information	54
Laser product label	54
Figure 16 Class 1 laser product label	54
International notices and statements	54
Canadian notice (avis Canadien)	54
European Union regulatory notice	55
Japanese notice	55
Korean notice	55
Taiwan notice	55
Electrostatic discharge	57
How to prevent electrostatic discharge	57
Grounding methods	57
Technical specifications	59
General specifications	59
Table 8 General specifications	59
Maintainability features	60
Table 9 Maintainability features	60
Fabric management specifications	61
Table 10 Fabric management specifications	61
Weight and physical dimensions	61
Table 11 Switch physical dimensions	61
Electrical specifications	61
Table 12 Electrical specifications	61
Environmental requirements	62
Table 13 Environmental requirements	62
Factory configuration defaults	63
Factory switch configuration	63
Table 14 Switch configuration defaults	63
Factory port configuration	64
Table 15 Port configuration defaults	64
Factory port threshold alarm configuration	65
Table 16 Port threshold alarm configuration defaults	65
Factory zoning configuration	65
Table 17 Zoning configuration defaults	65
Factory SNMP configuration	66
Table 18 SNMP configuration defaults	66
Factory switch services configuration	66
Table 19 Services configuration defaults	66
Factory DNS host name configuration	67
Table 20 DNS host name configuration defaults	67
Factory IP version 4 Ethernet configuration	67
Table 21 IP version 4 Ethernet configuration defaults	67
Factory IP version 6 Ethernet configuration	67
Table 22 IP version 6 Ethernet configuration defaults	67
Factory event logging configuration	68
Table 23 Event logging configuration defaults	68
Factory NTP server configuration	68
Table 24 NTP server configuration defaults	68
Factory timer configuration	68
Table 25 Timer configuration defaults	68
Factory RADIUS configuration	69
Table 26 RADIUS configuration defaults	69
Factory security configuration	69
Table 27 Security configuration defaults	69
Factory Call Home configuration	70
Table 28 Call Home service configuration defaults	70
Glossary	71
Index	75
Numerics	75
A	75
B	75
C	75
D	75
E	75
F	75
G	76
H	76
I	76
L	76
M	76
N	76
O	76
P	76
Q	76
R	77
S	77
T	77
U	77
V	77
W	77