HP StorageWorks 8/24 HP StorageWorks Fabric OS 6.1.2 release notes (5697-0349, - Page 11
Prerequisites, HP StorageWorks Fabric OS 6.1.2 release notes
View all HP StorageWorks 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Fabric OS Features (supported in interopmode 0) Fabric OS 6.1.2 Extended Fabrics Yes Yes 8 Alias Server No No Platform Service No No FCIP (VE_Ports) Yes Yes IPFC (IP over FC) Yes 9 Yes 8 M-EQS ALPA 0x13 configuration Yes Yes VE_Port to VEX_Port Yes Yes Integrated Routing Yes Yes Domain Offset Support No No 239 Domain Support N/A No Masterless F_Port Trunking (AG connect to Fabric OS switched only) Yes Yes FC10-6 to FC10-6 ISL Yes Yes RASlog Events on duplicate WWNs Yes Yes 1 Feature requires M-EOS 9.7 or later. 2 The feature is available, but not officially tested or supported. 3 SCC policies are supported only in conjunction with L2 Fabric Binding support. 4 Allowed only between Fabric OS-based switches. 5 DPS is supported outbound from Fabric OS-based switches. M-EOS can provide reciprocal load balancing using OpenTrunking. 6 Not supported in Fabric OS 6.0 and later. 7 Mode 3 qualified only with M-EOS switches. 8 Not on FCR. 9 Supported locally only within the Fabric OS switch. NOTE: FICON Cascaded CUP is qualified only on select platforms. Prerequisites Table 2 lists the supported Fabric OS firmware versions. HP recommends using the latest supported firmware release versions to get the greatest benefit from the SAN. For a list of retired products, see the HP website: http://www.hp.com HP StorageWorks Fabric OS 6.1.2 release notes 11