HP StorageWorks 8/24 HP StorageWorks Fabric OS 6.1.2a release notes (5697-0350 - Page 24
Fabric OS 6.1.1a fixes - san switch java
View all HP StorageWorks 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Closed defect summary Solution Invalid Tx/Rx rate can be computed if a polling cycle takes place when Fixed in Fabric OS 6.1.1. a domain name has not been assigned. An EZ Switch Manager validation error occurs on existing zones due to devices of type initiator+target or unknown being treated like storage. Fixed in Fabric OS 6.1.1. The Accept CT_IU to GA_NXT Request frame is being rejected by a third-party storage device because the frame size is 680 bytes. Fixed in Fabric OS 6.1.1. HP 8/80 FRU faulty status not recovered after connecting to correct power supply after operating with a single power supply. Fixed in Fabric OS 6.1.1. A Tape Selective Reset error occurs due to incorrect handling of Early Fixed in Fabric OS 6.1.1. End Synchronization status. A FICON Device Level Ack Emulation Processing error occurred. Fixed in Fabric OS 6.1.1. Fabric OS 6.1.1a fixes Table 10 lists defects closed in the Fabric OS 6.1.1a firmware release. Table 10 Fabric OS 6.1.1a closed defects Closed defect summary Solution The tag field of the node identifier command returned, contains the port number on which the command was received, instead of the tag field of the device on the other end of the link. Fixed in Fabric OS 6.1.1a. After systemverification -short is completed on the HP 8/80 Fixed in Fabric OS 6.1.1a. SAN Switch, the route is affected on platforms with BI ports. Third-party application paths fail with FC Fast Write enabled with bid- Fixed in Fabric OS 6.1.1a. irectional traffic due to out of order or dropped frames. Speed negotiation fails on some 4-Gb Quad-Rate, long-wave, 4-km SFPs. Fixed in Fabric OS 6.1.1a. Java is running out of memory in WebTools causing sluggish response. Fixed in Fabric OS 6.1.1a. On a backbone switch with both EX_Ports and VE_Ports, or VEX_Ports, Fixed in Fabric OS 6.1.1a. after hafailover and hareboot, the device on the backbone has no access to the remote device. Need better response message from CAL when the setting of SCC policy fails. Fixed in Fabric OS 6.1.1a. When transient failure occurs at the same time as core blade plug in- Fixed in Fabric OS 6.1.1a. sertion, frames could be dropped in the switch, leading to SCSI timeouts and errors. 24