HP StorageWorks 8/40 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 281
Displaying slot information
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Table 71 Port blades supported by each platform (continued) Port blades HP StorageWorks 4/256 SAN Director (CP4) HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch B-Series Multi-Protocol Supported Router Blade Supported FS8-18 Supported Supported 1. Can coexist only with HP StorageWorks 4/256 SAN Director 16 Port 4Gb Blade. Displaying slot information 1. Connect to the switch and log in as admin. 2. Enter the slotShow -m command to display the current status of each slot in the system. The format of the display includes a header and four fields for each slot. The fields and their possible values are: Slot Displays the physical slot number Blade Type (Displays the blade type) SW BLADE: The blade is a port blade. CP BLADE: The blade is a control processor. CORE BLADE: The blade is a core blade (HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch only). AP BLADE: The blade is the B-Series Multi-Protocol Router Blade. UNKNOWN: The blade is not present or its type is not recognized. ID (Displays the hardware ID of the blade type) Fabric OS 6.2 administrator guide 279