HP StorageWorks 8/40 HP StorageWorks Fabric OS 6.2.0d release notes (5697-0353 - Page 14
/256 SAN Director blade support, DC SAN Backbone and DC04 SAN Director blade support
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4/256 SAN Director blade support Fabric OS 6.2.0d is fully qualified and supports the Director blades listed in Table 2. Table 2 4/256 SAN Director blade support matrix Director blade FC4-16 FC4-32 FC4-48 FC8-16 FC8-32 FC8-48 FC10-6 Number of blades Supported with any mix with up to eight blades of each type. No intermix restrictions. The 4/256 SAN Director must run Fabric OS 6.0.0b or later to support the FC816 port blade, and Fabric OS 6.1.0a or later to support the FC8-32 and FC8-48 port blades. FC4-16IP (iSCSI blade) Up to four blades of this type FR4-18i (FCIP/FC Router blade) Up to two blades of this type. Up to eight FR4-18i blades can be installed if they are used only for FC Fast Write or FCIP without routing. DC SAN Backbone and DC04 SAN Director blade support Fabric OS 6.2.0d is fully qualified and supports the DC Director blades listed in Table 3. Table 3 DC Director blade support matrix Director blade FC8-16 FC8-32 FC8-48 FC10-6 Number of blades Supported with Fabric OS 6.0.0b or later with any mix, with up to eight blades of each type on the DC SAN Backbone Director. There are no intermix restrictions. The DC04 SAN Director requires Fabric OS 6.2.0a or later, and supports up to four blades. FC4-16IP (iSCSI blade) Not supported with the DC SAN Backbone Director or DC04 SAN Director FR4-18i (FCIP/FC Router blade) Supported with Fabric OS 6.0.0b or later, with a maximum of four blades of this type on the DC SAN Backbone Director. Up to eight FR4-18i blades can be installed if they are used only for FC Fast Write or FCIP without routing in the DC SAN Backbone Director. The DC04 SAN Director requires Fabric OS 6.2.0a or later, and supports up to four blades. FS8-18 (DC Switch Encryption FC blade) Supported with Fabric OS 6.2.0b or later, with a maximum of four blades of this type on the DC SAN Backbone Director or DC04 SAN Director 14