HP StorageWorks 8/8 Brocade Troubleshooting and Diagnostics Guide v6.1.0 (53-1 - Page 83
FCIP Issues, In this FCIP tunnel issues
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
FCIP Issues Chapter 9 This chapter describes the FCIP concepts, configuration procedures, and tools and procedures for monitoring network performance. Commands described in this chapter require Admin or root user access. See the Fabric OS Command Reference for detailed information on command syntax. In this chapter •FCIP tunnel issues 69 •FCIP links 71 •Port mirroring 72 •FTRACE concepts 76 FCIP tunnel issues The following are the most common FCIP tunnel issues and provide recommended actions for you to follow to fix the issue. Symptom FCIP tunnel does not come Online. Probable cause and recommended action Confirm the following steps. 1. Confirm GE port is online. portshow ge1 Eth Mac Address: 00.05.1e.37.93.06 Port State: 1 Online Port Phys: 6 In_Sync Port Flags: 0x3 PRESENT ACTIVE Port Speed: 1G 2. Confirm IP configuration is correct on both tunnel endpoints. portshow ipif ge1 Port: ge1 Interface IP Address NetMask MTU 0 11.1.1.1 255.255.255.0 1500 3. Issue the ping command to the remote tunnel endpoint from both endpoints and traceroute. -s is the source IP address -d is the destination IP address portcmd --ping ge1 -s 11.1.1.1 -d 11.1.1.2 Pinging 11.1.1.2 from ip interface 11.1.1.1 on 0/ge1 with 64 bytes of data Fabric OS Troubleshooting and Diagnostics Guide 69 53-1000853-01