HP StorageWorks 8/80 HP StorageWorks 8-Gb SAN Switch hardware reference manual - Page 91
Boot, Supported HBAs and CNAs
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Boot In addition to POST, boot includes the following tasks after POST is complete: • Performs universal port configuration. • Initializes links. • Analyzes fabric. If any ports are connected to other switches, the switch participates in a fabric configuration. • Obtains a domain ID and assigns port addresses. • Constructs unicast routing tables. • Enables normal port operation. Supported HBAs and CNAs NOTE: Converged Network Adapters (CNAs) apply to the FCoE Converged Network Switch only. For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the latest version of the HP StorageWorks SAN design reference guide: http://www.hp.com/go/ sandesignguide. 8-Gb SAN Switch hardware reference manual 91
Boot
In addition to POST, boot includes the following tasks after POST is complete:
•
Performs universal port configuration.
•
Initializes links.
•
Analyzes fabric. If any ports are connected to other switches, the switch participates in a fabric
configuration.
•
Obtains a domain ID and assigns port addresses.
•
Constructs unicast routing tables.
•
Enables normal port operation.
Supported HBAs and CNAs
NOTE:
Converged Network Adapters (CNAs) apply to the FCoE Converged Network Switch only.
For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the
latest version of the
HP StorageWorks SAN design reference guide
:
h
t
tp://w
w
w
.hp
.co
m/go/
s
ande
si
gngui
de
.
8-Gb SAN Switch hardware reference manual
91