HP StorageWorks 8-EL HP StorageWorks SAN Switch Rack Mount Kit Installation In - Page 8
Installing the Switch in a Rack Using the SAN Switch, Rack Mount Kit
![]() |
View all HP StorageWorks 8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the Switch in a Rack Using the SAN Switch Rack Mount Kit This section provides instructions for installing the SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series or comparable EIA rack using the SAN Switch Rack Mount Kit, part number 331148-B21. Figure 1: SAN Switch 2/16 rack-mounted switch Note: The Rack Mount Kit installation requires one technician to install a SAN switch. The following items are required to install the switch in a rack: ■ SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8 ■ Power cables ■ #2 Phillips screwdriver ■ 7/16-inch wrench or socket ■ The SAN Switch Rack Mount Kit rails and rail mounting hardware listed next: 8 SAN Switch Rack Mount Kit Installation Instructions
![](/manual_guide/products/hewlettpackard-158223b21-hp-storageworks-san-switch-rack-mount-kit-installation-instructions-avru6ybte-2003-c5cbbc7/8.png)