HP StorageWorks MA8000 HP StorageWorks HSG80 Enterprise Modular Storage RAID A - Page 39

Solution Software Kit Upgrade Procedures These procedures are applicable to only Secure Path V3.1A for Windows (SP 3) or Secure Path V4.0-1 or higher for Windows. To obtain Secure Path V3.1A for Windows (SP 3), visit the HP web site at http://www.hp.com. Follow the applicable storage-related links to the software download page. To obtain Secure Path for Windows, contact your HP technical support representative. Note: For information on updating the Solution Software Kit using transparent failover procedures, see the HP StorageWorks HSG80 ACS Solution Software Version 8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide. New Solution Software Kit V8.8-1 Installation Procedures To install the Solution Software Kit for the first time, complete the following steps: 1. Ensure that the Fibre Channel Adapter (FCA) is not connected. 2. Download the Solution Software Kit and click Solution Software for Windows. a. Click Perform Multi Driver Update to install the HBA driver. b. Choose Multipath or Transparent Mode. c. Click SWCC (optional) to install SWCC components. Note: Do not restart the server at this time if instructed to do so. 3. Using your Secure Path Software CD, install Secure Path V3.1A for Windows or Secure Path V4.0-1 or higher for Windows in accordance with the instructions provided with that product. If you are using Secure Path V3.1A, apply the Secure Path V3.1A for Windows SP 3 update. 4. Shut down the server. 5. Connect the FCA fibre cables to the switch(es). 6. Restart the server. HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for 39 Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes