HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.2.1 Release Notes (AA-RUQ - Page 5
Technical support - san switch firmware
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Table 1 Issues resolved in this 3.2.1 release (continued) Issue prior to Fabric OS 3.2.1 Fix Short burst of bad primitives on the link Fabric OS 3.2.1 extends switch tolerance to the causes rx_under flow error. number of bad primitives. If two or more ports zoned together on a SAN Switch 2/16, ZONEGROUPADDFAIL message displayed. Multiple ports in same Zone function normally. Email configured via Fabric Watch was not received on certain third party mail servers. Email header format adjusted. Technical support Contact Hewlett-Packard support for hardware, firmware, and software support, including product repairs and part ordering. To assist your support representative and to expedite your call, have the following information available: • Technical support contact number, if available • Switch model • Switch operating system version • Error messages received • Output from supportshow command • Detailed problem description and specific questions • Description of any troubleshooting steps already performed and results Switch serial number The switch serial number and corresponding bar code are provided on the serial number label, as shown here. *FT00X0054E9 FT00X0054E9 World Wide Name (WWN) At the CLI prompt, type the wwn command to display the switch WWN. Fabric OS 3.2.1 release notes 5