HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW
HP StorageWorks MSA 2/8 - SAN Switch Manual
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks MSA 2/8 manual content summary:
- HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 1
) Part Number: AA-RW24A-TE This document is an addendum for Fabric OS users to supplement the Fabric OS version 3.x documentation set. This document is specific to Fabric OS version 3.x and all switches running Fabric OS version 3.x, including the HP StorageWorks SAN Switch 2/8 EL, SAN Switch 2/16 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 2
incidental or consequential damages in connection with the furnishing, performance, HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP Part Number: AA-RW24A-TE - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 3
11 Getting help 12 HP technical support 12 HP storage web site 12 HP authorized reseller 12 1 Advanced performance monitor user guide 13 ISL Monitoring 13 Using ISL Monitoring 14 Displaying ISL Monitors 14 Clearing ISL Monitors 15 2 Advanced Web Tools user guide 17 Configuring the Web - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 4
an Account Password 136 Setting Up RADIUS AAA Service 137 Considerations for RADIUS Use 138 Accounting Support 139 Setting Up the RADIUS Server 139 Windows 2000 139 Linux 141 Setting Up the Switch 142 Configuring for SNMP 145 Configuring for SNMPv1 146 7 ISL trunking user guide 151 Long - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 5
8 Fabric OS reference guide 153 aaaconfig 155 agtcfgshow 157 authutil 159 configdownload 161 configure 164 fabretryshow 175 fabricshow zoneobjectexpunge 234 zoneobjectrename 236 9 Fabric Watch User Guide 239 Fabric Watch Reports 239 Switch Health Report 239 Fabric Watch Message Formats - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 6
filter dialog box 24 6 Switch Information Tab 26 7 Network Configuration Tab 27 8 Firmware Tab 28 9 SNMP Tab (Secure Mode disabled 31 10 License Admin Tab 33 11 Port Setting Tab 35 12 Configure (Fabric) Tab 37 13 Configure (Virtual Channel) Tab 39 14 Configure (Arbitrated Loop) Tab 40 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 7
74 12 Access Defaults 133 13 Switch Fabric Settings 165 14 Virtual Channel Settings 168 15 Zoning Operation Parameter 169 16 RSCN Transmission Mode 169 17 Arbitrated Loop Settings 169 18 Enable CLOSE on OPEN Received Values 170 19 System Services Settings 170 20 Configure Application - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 8
Contents 8 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 9
this Guide ■ HP StorageWorks SAN Switch 2/8 EL ■ HP StorageWorks SAN Switch 2/16 ■ HP StorageWorks MSA SAN Switch 2/8 For example, this document provides important technical updates to the following documents: ■ HP StorageWorks Advanced Performance Monitor Version 3.1.x/4.1.x User Guide, part number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 10
product, for example SAN Switch 2/16, SAN Switch 2/8 EL, or MSA SAN Switch 2/8 models. The switch overview page displays. 5. Go to the Product information section, located on the far right side of the web page. 6. Click Technical documents. 7. Follow the on-screen instructions to download the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 11
, italic font Blue underlined sans serif font text: http://www.hp.com Element Cross-reference links User input, commands, code, file and directory names, and system responses (output and messages) Variables web site addresses Text symbols The following symbols may be found in the text of this guide - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 12
still have a question after reading this guide, contact an HP authorized service provider or access our web site: http://www.hp.com. HP technical support Telephone numbers for worldwide technical support are listed on the following HP web site: http://www.hp.com/support/. From this web site, select - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 13
user guide 1 This chapter contains updates to the HP StorageWorks Advance Performance Monitor Version 3.1.x/4.1.x User Guide, part number Telnet Commands," add the following: ISL Monitoring Note: ISL monitoring is supported only in Fabric OS v3.2.x. ISL monitoring measures the outbound traffic - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 14
HP Fabric Manager, for which ISL monitoring must be enabled on a per-switch basis. For more information, refer to the HP StorageWorks Fabric Manager User Guide transmit counter for each individual domain ■ Total number of domains being monitored ■ Number of ports in the ISL The following example - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 15
Advanced performance monitor user guide Clearing ISL Monitors Use the perfMonitorClear command to clear ISL monitor counters. The following example clears statistical counters for an ISL monitor. switch:admin> perfmonitorclear "ISL", 0 This will clear ISL monitor on port 0, continue? (yes, y, no, - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 16
Advanced performance monitor user guide 16 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 17
Advanced Web Tools user guide 2 This chapter contains updates to the HP StorageWorks Web Tools Version 3.1.x/4.1.x User Guide, part number AA-RS25C-TE. On original page 28, under the heading "Fabric Tree," after the following text: ■ A Fabric Admin tool bar which provides access to fabric - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 18
Web Tools user guide On original the supported browsers, operating systems, and JavaTM Plug-ins for this release. Table 2: Supported platforms 10 switches or fewer ■ 256 MB or more RAM for fabrics comprising 15 switches or fewer ■ 512 MB or more RAM for fabrics comprising more than 15 switches A - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 19
user guide On original page 38, replace the entire "Installing a Web Browser" section with the following: If not already installed, install one of the following browsers: ■ Internet Explorer 6.0 ■ Mozilla 1.6 For instructions on installing Mozilla (supported on Solaris only). Configuring Internet - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 20
license, Web Tools allows a 45-day grace period in which you can still monitor the switch. Web Tools displays warning messages periodically, informing you that your fabric size exceeds the supported switch configuration limit and telling you how long you have before Web Tools will be disabled. After - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 21
Advanced Web Tools user guide On original page 65, under the heading "Switch Status Example," replace original Figure 13, "Switch status window," with the following: Figure 2: Switch status window On original page 66, under the heading "Using the Switch Status Button," add the following at the end - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 22
Advanced Web Tools user guide Figure 3: Switch status window, port detail 22 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 23
Tools user guide On original page 67, under the heading "Switch Events Example," replace original Figure 14, "Switch events window," with the following: Figure 4: Switch events window On original page 67, under the heading "About the Switch Events Button," add the following: Filtering Switch Events - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 24
Web Tools user guide Figure 5: Event filter dialog box Filtering Events by Time Intervals To filter events by time intervals: 1. Launch Web Tools. 2. Select the desired switch from the Fabric Tree. The Switch View opens. 3. Select the Switch Events button from the Switch View. A Switch Events - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 25
Advanced Web Tools user guide 3. Select the Switch Events button from the Switch View. A Switch Events Report appears Switch Admin Window Field Descriptions," modify original Table 17, "Switch Admin Window Field Descriptions," as follows. Delete the following row: Reset Click this button to reset - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 26
Advanced Web Tools user guide On original page 95, under the heading "Switch Information Tab Example," replace original Figure 18, "Switch Information Tab," with the following: Figure 6: Switch Information Tab 26 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 27
Advanced Web Tools user guide On original page 99, under the heading "Network Config Tab Example," replace original Figure 19, "Network Configuration Tab," with the following: Figure 7: Network Configuration Tab On original page 100, in original Table 19, "Network Config Field Descriptions," - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 28
user guide On original pages 103 through 105, replace the entire section, "About the Upload/Download Tab," with the following: About the Firmware Tab Use the Firmware tab to complete tasks such as: ■ Downloading firmware ■ Returning the switch to the original configuration ■ Rebooting the switch - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 29
Web Tools user guide Firmware Field Descriptions The Firmware fields are described in Table 3. Table 3: Firmware field descriptions Field Firmware Version Firmware download Firmware download and Fastboot Protocol Host IP File Name User Name Password Fastboot Reboot Firmware Download Progress - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 30
Click Fastboot. 5. Click Apply. Performing a Reboot To perform a reboot of a switch: 1. Access the Switch Admin Window (see "About the Switch Admin Window"). 2. Enter the admin user name and password. 3. Select the Firmware tab. 4. Click Reboot. 5. Click Apply. 30 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 31
Advanced Web Tools user guide On original page 109, under the heading "SNMP Tab Example," replace original Figure 22, "SNMP information. Delete the following row: Trap Level Use to set the severity level of switch events that prompt SNMP traps. Default is 0. Fabric OS 3.x Document Addendum 31 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 32
Advanced Web Tools user guide Delete the following row: Permissions Displays the read/write access of a community string can be both viewed and make changes. Use to set the severity level of switch events that prompt SNMP traps. Default is 0. On original page 111, under the heading "Using the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 33
Advanced Web Tools user guide On original page 112, under the heading "License Admin Tab Example," replace original Figure 23, "License Admin Tab," with the following: Figure 10: License Admin - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 34
Advanced Web Tools user guide On original page 114, under the heading "Add a License to a Switch," delete the following steps 4 and License button. On original page 114, under the heading "Remove a License From a Switch," replace step 4: 4. Enter the license key to remove, or double-click a license - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 35
Advanced Web Tools user guide On original page 116, under the heading "Port Settings Tab Example," replace original Figure 24, "Port Setting Tab," with the following: Figure 11: Port Setting - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 36
parameters. With this text: Use the Configure tab of the Administrative Interface to configure Fabric Parameters, Virtual Channel parameters, Arbitrated Loop parameters, and System Services parameters, and to back up and download the switch configuration file. 36 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 37
Advanced Web Tools user guide On original page 121, under the heading "Configure (Fabric) Tab Example," replace original Figure 25, "Configure (Fabric) Tab," with the following: Figure 12: Configure (Fabric) Tab Fabric OS 3.x Document Addendum 37 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 38
user guide On original page 122, in original Table 24, "Configure (Fabric) Field Descriptions," modify the following information. Replace the corresponding rows with the following: Datafield Size Sequence Level Switching Use to configure Channel Storage Switch 8 or Fibre Channel Storage Switch 16 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 39
Advanced Web Tools user guide On original page 124, under the heading "Configure (Virtual Channel) Tab Example," replace original Figure 26, "Configure (Virtual Channel) Tab," with the following: Figure 13: Configure (Virtual Channel) Tab Fabric OS 3.x Document Addendum 39 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 40
Advanced Web Tools user guide On original page 126, under the heading "Configure (Arbitrated Loop) Tab Example," replace original Figure 27, "Configure (Arbitrated Loop) Tab," with the following: Figure 14: Configure (Arbitrated Loop) Tab 40 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 41
Advanced Web Tools user guide On original page 128, under the heading "Configure (System) Tab Example," replace original Figure 28, "Configure (System) Tab," with the following: Figure 15: Configure (System) Tab Fabric OS 3.x Document Addendum 41 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 42
Advanced Web Tools user guide On original page 129, after the section "Configure (System) Field Descriptions," add the following sections: Configure (Upload/Download) Tab Example An example of the Configure (Upload/Download) Tab is shown in Figure 16. Figure 16: Configure (Upload/Download) Tab - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 43
the following sections: Backing Up a Switch Config File To back up a firmware configuration file: 1. Access the Switch Admin Window (see "About the Switch Admin Window.") 2. Enter the admin user name and password. 3. Select the Switch Information tab. 4. Disable the switch. 5. Click the Apply button - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 44
radio button. 9. Enter the User Name, Password, and Host IP information. 10. Enter the name of the config file with a fully qualified path. 11. Click Apply. You can monitor the progress by looking at the Upload/Download Progress bar on the Configure tab. 12. Enable the switch. On original page 132 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 45
Advanced Web Tools user guide On original page 135, under the heading "Routing (Static Route) Tab Example," replace original Figure 30, "Routing (Static Route) Tab," with the following: Figure 18: Routing (Static Route) Tab Fabric OS 3.x Document Addendum 45 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 46
Advanced Web Tools user guide On original page 137, under the heading "Routing (Link Cost) Tab Example," replace original Figure 31, "Routing (Link Cost) Tab," with the following: Figure 19: Routing (Link Cost) Tab On original page 141 under the heading "Configuring Link Cost," add the following - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 47
Advanced Web Tools user guide On original page 143, replace the section "Extended Fabrics Tab Example" with the following: Extended Fabric Tab Example An example of the Extended Fabric tab is shown in Figure 20. Figure 20: Extended Fabric Tab On original pages 143 and 144, under the heading " - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 48
user guide In original Table 33, "Extended Fabric Field Descriptions," delete the following rows: Enable Disable Extended Fabric Mode Click the radio button to enable the Extended Fabric mode. The switch heading "Using the Extended Fabric Tab to Configure a Port For Long-Distance," delete steps - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 49
Advanced Web Tools user guide On original page 145, after the section "Using the Extended Fabric Tab to Configure a Port For Long-Distance," add the following sections: About the AAA Service Tab Use the AAA Service tab to manage the RADIUS server. Through the AAA Service tab, you can perform the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 50
must be logged in as admin to configure the RADIUS server. To configure the RADIUS server: 1. Access the Switch Admin Window (see "About the Switch Admin Module.") 2. Enter the admin user name and password. 3. Select the AAA Service tab. 4. Click Add. You can configure up to five RADIUS servers. If - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 51
order that the RADIUS servers are contacted: 1. Access the Switch Admin Window (see "About the Switch Admin Module.") 2. Enter the admin user name and password. 3. Select the AAA Service tab. 4. Select a RADIUS server from the RADIUS Configuration list. 5. Click the up and down arrows to rearrange - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 52
Advanced Web Tools user guide Removing a RADIUS Server To remove a RADIUS server: 1. Access the Switch Admin Window (see "About the Switch Admin Module.") 2. Enter the admin user name and password. 3. Select the AAA Service tab. 4. Select a RADIUS server from the RADIUS Configuration list. 5. Click - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 53
Advanced Web Tools user guide On original page 174, replace original Figure 41, "Alarm Notification depending on the item selected in the Navigation tree. With this row: Area Selection Displays the configurable areas in the drop-down menu. The items listed change, depending on the item selected in - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 54
Advanced Web Tools user guide On original page 177, delete the section "About the Threshold Configuration Tab." On original page 177, in the section "Threshold Configuration Tab Example," replace the text and the original Figure 42, "Threshold Configuration Area Configuration Tab," with the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 55
user guide On original pages 177 and 178, add the following table after original Figure 42, "Threshold Configuration Area Configuration Tab": Table 6: Threshold Configuration Tab Components Component Area Selection pull-down menu Trait Configuration tab Alarm Configuration number of low boundaries - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 56
Advanced Web Tools user guide Alarm Configuration Tab Table 8 lists and describes the components of the Alarm Configuration tab. Table 8: Alarm Configuration Components Component System Default and Custom Defined checkboxes Activate Level radio buttons Description Select Alarm settings for - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 57
user guide On original page 181, under the heading "Configuring Boundary and Alarm Settings," replace the procedure in the section with the following: To configure the Activate Level area. 12. Click Apply. On original page 182, under the heading "View an Alarm Configuration Report," modify the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 58
user guide On original page 184, replace original Table 45, "Email Configuration Field Descriptions," with the following: Table 9: Email Configuration events. For switches that have a different level of security from the launch switch, a number is displayed, indicating how many switches have no - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 59
Advanced Web Tools user guide On original page 190, under the heading "Fabric Events Example," replace original Figure 45, "The Fabric Events Window," with the following: Figure 26: The Fabric - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 60
Advanced Web Tools user guide 5. Optional: To filter events within a certain time period: a. Click From and enter the start time and date in the fields. b. Click To and enter the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 61
Advanced Web Tools user guide On original page 195, under the heading "Name Server Example," replace original Figure 47, "Name Server Table Window," with the following: Figure 27: Name Server - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 62
Advanced Web Tools user guide On original page 196, replace original Table Service Fabric Port Name Fabric Port WWN Port IP Address Hard Address Description Displays the domain ID of the switch to which the device is connected. Displays the number of the switch port to which the device is connected - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 63
. If the selected switch has a Zoning license installed but is not the primary switch, the Zone Admin icon is displayed in the Fabric Toolbar but not activated. For specific information regarding secure fabrics, refer to the HP StorageWorks Secure Fabric OS Version 1.0 User Guide. When you click - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 64
Advanced Web Tools user guide In the Zone Admin module, all WWNs also display vendor names is updated only when you manually refresh the Zone Admin contents by clicking the Refresh icon at the bottom right corner of the Zone Admin window, or when you enable a configuration through the Zone Admin - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 65
Advanced Web Tools user guide Caution: Clicking the Refresh icon in the lower right corner of If no zone is enabled, a message is displayed, indicating that there is no active zoning configuration on the switch. On original page 208, in the section "Adding a WWN in the Zoning Database," replace the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 66
Advanced Web Tools user guide On original page 209, in the section "Replacing a WWN in the Zoning Database," replace the following heading: Replacing a WWN in the Zoning Database With this - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 67
Advanced Web Tools user guide On original page 217, under the heading "Alias Tab Example," replace original Figure 51, "Alias Tab in the Zone Administration Window," with the following: Figure - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 68
Advanced Web Tools user guide On original page 223, under the heading "Zone Tab Example," replace original Figure 52, "Zone Tab in the Zone Administration Window," with the following: Figure - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 69
Advanced Web Tools user guide On original pages 232 and 233, under the heading "Deleting an QuickLoop," in step 5, replace the following text: The selected QuickLoop is deleted from the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 70
Advanced Web Tools user guide On original page 238, under the heading "Deleting an Fabric Assist Zone," in step 5, replace the following text: The selected Fabric Assist Zone is deleted - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 71
Advanced Web Tools user guide On original page 246, after the section "Creating a Configuration Analysis Report," add the following section: Displaying an Initiator/Target Accessibility 1. Access the Zone Administration window. See "Accessing the Zone Administration Window" for more information. 2. - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 72
Advanced Web Tools user guide 72 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 73
3 This chapter contains updates to the HP StorageWorks Zoning Version 3.1.x/4.1.x User Guide, part number AA-RS26C-TE. On original page 17, under the heading "License Activation Using Web Tools," replace the following text: 6. Enter the license key in the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 74
Zoning version user guide On page 30, under the heading "Detailed Zone Configuration Procedures," add the following: Table 11 presents 256 128 256 Note: Zoning databases larger than 96 KB are not supported on SAN Switch 2/8 EL and SAN Switch 2/16 with 16 MB of memory. 74 Fabric OS 3.x Document - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 75
Diagnostic and system error messages reference guide 4 This chapter contains updates to the HP StorageWorks Diagnostic and System Error Messages Version 3.1.x Reference Guide, part number AA-RUPZA-TE. The following modules report new (AUTH and SEC) or modified messages in Fabric OS v3.2.x: ■ AUTH - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 76
Diagnostic and system error messages reference guide AUTH-AUTHCFGCHANGE Message INFO AUTH- problem is transient. Retry the command. If the command fails consistently, copy the message, collect switch information using the supportshow command, and contact your switch service - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 77
problem is transient. Reinitialize authentication by issuing switchdisable and switchenable commands or the portdisable and portenable commands. If the command fails consistently, copy the message, collect switch information using the supportshow command, and contact your switch service provider - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 78
or switch. ■ Failed to get security license. ■ Failed to validate switch or port name. ■ Disabled port due to unauthorized switch that is not configured in license error, make sure that the security license is properly installed, using the licenseshow command. Reinstall the license, if necessary, - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 79
-edge PID. For more information on PID format, refer to the HP StorageWorks Fabric OS Procedures Version 3.1.x/4.1.x User Guide. Recommended Action This message is for information purposes only. The entire fabric must be configured with the same PID format or the fabric segments. Severity WARNING - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 80
guide DIAG-BADINT Message CRITICAL DIAG-BADINT, 1, , pass , Pt got interrupt, int_status=0x - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 81
is for internal use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-CAMINIT Message CRITICAL DIAG-CAMINIT, 1, , pass , Pt Failed to Init - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 82
or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-CAMSID Message CRITICAL DIAG-CAMSID, 1, , pass , Pt Failed SID - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 83
Cause The ASIC improperly counted the number of frames with CRC errors. This usually indicates an ASIC failure. This message is generated by the statisticstest command. The error code value is for internal use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 84
internal use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-CMBISRTO Message CRITICAL DIAG-CMBISRTO, 1, , pass , Pt BISR,BIST Timed Out - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 85
use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-CMERRTYPE Message CRITICAL DIAG-CMERRTYPE, 1, , pass , Pt-Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 86
system error messages reference guide Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-CMICKSUM Message CRITICAL DIAG-CMICKSUM, 1, , pass , Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 87
use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-CMIINVCAP Message CRITICAL DIAG-CMIINVCAP, 1, , pass , Pt-Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 88
guide DIAG-CMINOCAP Message CRITICAL DIAG-CMINOCAP, 1, , pass - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 89
SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-DATA Message CRITICAL DIAG-DATA, 1, , pass - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 90
. Recommended Action Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL 90 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 91
if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-ERRSTAT (BADORD) Message CRITICAL DIAG-ERRSTAT (BADORD), 1, , pass , Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 92
necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-ERRSTAT (CRC) Message CRITICAL DIAG-ERRSTAT (CRC), 1, , pass , Pt CRC_err - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 93
SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-ERRSTAT (ENCIN) Message CRITICAL DIAG-ERRSTAT (ENCIN), 1, , pass , Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 94
if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-ERRSTAT (ENCOUT) Message CRITICAL DIAG-ERRSTAT (ENCOUT), 1, , pass , Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 95
or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-INIT Message CRITICAL DIAG-INIT, 1, , pass , Pt Failed to - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 96
or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-INTNIL Message CRITICAL DIAG-INTNIL, 1, , pass , Pt Failed to get - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 97
is for internal use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-LCMEM Message CRITICAL DIAG-LCMEM, 1, , pass , Pt Data Wr/Rd, bNum 0x - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 98
for internal use only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-LCMRS Message CRITICAL DIAG-LCMRS, 1, , pass , Pt Read Short: is - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 99
system error messages reference guide DIAG-LCMTO Message CRITICAL DIAG-LCMTO, 1, , pass , Pt Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG- - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 100
Diagnostic and system error messages reference guide Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-MEMORY Message CRITICAL DIAG-MEMORY, 1, , Memory Error, Address < - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 101
number>, Err# Probable Cause The memory size to be tested is less than or equal to 0. This usually indicates a motherboard failure. This message is generated by the ramtest command. The error code value is for internal use only. Recommended Action For the SAN Switch cable connections. - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 102
SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-PORTDIED Message CRITICAL DIAG-PORTDIED, 1, DIAG-PORTDIED , pass , Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 103
problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-PORTM2M Message CRITICAL DIAG-PORTM2M, 1, , Pt Port M->M Connection 1, , nMegs, Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 104
or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-PORTWRONG Message CRITICAL DIAG-PORTWRONG, 1, , pass , Frame Received at Wrong Port - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 105
Diagnostic and system error messages reference guide DIAG-POST_SKIPPED Message WARNING DIAG-POST_SKIPPED, 4, only. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL Fabric OS 3.x - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 106
internal use only. Recommended Action Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. 106 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 107
system error messages reference guide DIAG-STATS (FRX) Message CRITICAL DIAG-STATS (FRX), 1, , pass , Pt If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 108
if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-TBRAM_DEC_RWTEST Message CRITICAL DIAG-TBRAM_DEC_RWTEST, 1, , pass , Pt Failed - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 109
error messages reference guide Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-TBRAM_INC_RWTEST Message CRITICAL DIAG-TBRAM_INC_RWTEST, 1, , pass , Pt - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 110
SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-TIMEOUT Message CRITICAL DIAG-TIMEOUT, 1, , pass - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 111
or SFP if necessary. If the problem persists: ■ For the SAN Switch 2/16, replace the motherboard FRU. ■ For the SAN Switch 2/8 EL, replace the entire switch. Severity CRITICAL DIAG-XMIT Message CRITICAL DIAG-XMIT, 1, , pass , Pt Cannot Transmit Frame - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 112
in which this EFP was used for verifying the neighbor's domain list as part of fabric warm-start recovery. A reject occurs if the neighbor is different principal switch priority number. HA: PWWN EFP resp Received an EFP accept response in which the response has a different principal switch World - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 113
messages reference guide D-list conflict The principal switch received a domain list that contains more domains than what the principal switch has already assigned. Recommended Action If the reconfiguration was unplanned, check for problems with the specified port. Some troubleshooting tasks - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 114
Diagnostic and system error messages reference guide SEC-ACCT, Added Message INFO SEC-ACCT, 4, Added account with authorization Probable Cause The specified new account was created. Recommended Action No action is required. Severity INFO SEC-ACCT - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 115
guide SEC-ACCT, Deleted Message INFO SEC-ACCT, 4, Deleted account Probable Cause An existing account was deleted. Recommended Action No action is required. Severity INFO SEC-ACCT, Recovered Message INFO SEC-ACCT, 4, Recovered - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 116
conditions required for secure mode are installed on the switch. Correct any missing requirements, such as a missing zoning license, RCS capability, or the PID mode on the switch. Refer to the HP StorageWorks Secure Fabric OS Version 1.0 User Guide for more information on secure mode requirements - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 117
Diagnostic and system error messages reference guide SEC-PIDCHGERR, PID Change failed: Size check failed Message < Message ERROR SEC-PIDCHGERR, 2, Change failed: Switch is busy. Operation failed. Probable Cause The switch security daemon is busy. The status values can be defined - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 118
2, RCS process fails: %s Probable Cause The Reliable Commit Service (RCS) process failed to complete. RCS is a reliable mechanism to transfer data from one switch to the other switches within the fabric. This mechanism guarantees that either all switches commit to the new database or none of them - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 119
Diagnostic and system error messages reference guide SEC-SECCHANGE Message INFO SEC-SECCHANGE, 4, reset. ■ secfcsfailover: The primary FCS has failed over to a new switch. ■ All password changes: A, B, C account passwords were changed. (A, B, C are account names for which passwords - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 120
security data to domain after retries Probable Cause The specified domain number failed to download security data after the specified number of attempts. The primary switch segments the failed switch after 30 tries. The failed switch might have had some internal - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 121
■ Low memory ■ Queue full ■ Failure to set password ■ Failure to set SNMP string ■ Failure to sign message ■ Primary FCS downloads security database ■ Nonprimary FCS switch receives security database download Recommended Action This is usually a transient problem. Retry the command that caused the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 122
system error messages reference guide SEC-SEC_STATS Message - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 123
Diagnostic and system error messages reference guide SEC-SECVIOL_HTTP Message INFO SEC-SECVIOL_HTTP, 4, Security violation: Unauthorized host with IP address tries to establish HTTP connection. Probable Cause An HTTP security violation was reported. The specified - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 124
guide SEC-SECVIOL_DCC Message INFO SEC-SECVIOL_DCC, 4, Security violation: Unauthorized device tries to flogin to port of switch . Peer IP: Probable Cause A login security violation was reported. An incorrect password - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 125
Diagnostic and system error messages reference guide SEC-SECVIOL_MSaccess Message INFO SEC-SECVIOL_MSaccess switch. Recommended Action Check the management server policy and verify that the connection is allowed. If the connection is allowed but not specified, enable the connection - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 126
was reported. A management server device is operating on a nonprimary FCS switch. Recommended Action Check the management server policy and verify that the connection is allowed. If the connection is allowed but not specified, enable the connection in the MS policy. If the MS policy does not allow - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 127
INFO SEC-SECVIOL_SERIAL Message INFO SEC-SECVIOL_SERIAL, Probable Cause A serial connection policy security violation was reported. An attempt was made to access the serial console when it is disabled. Recommended Action Determine whether an unauthorized access - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 128
Diagnostic and system error messages reference guide SEC-SECVIOL_WSNMP Message INFO SEC-SECVIOL_WSNMP, 4, Security violation: Unauthorized host with IP address tries to do SNMP write operation. Probable Cause An - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 129
3.1.x/4.1.x User Guide, part number AA-RTSDC-TE. On page 26, under the heading "VC Translation Mode," replace the following text: VC_Translation_Link_Init Specify 1 to activate long distance link initialization sequence. This mode is used to initiate long distance connections. When configuring - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 130
Extended fabric user guide 130 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 131
updates to the HP StorageWorks Fabric OS Procedures Version 3.1.x/4.1.x User Guide, part number AA-RS23C-TE. On page 47, in the section "Domain IDs," add the following information: Domain IDs are assigned dynamically when a switch is enabled. The domain ID can be set manually, however, to control - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 132
Fabric OS procedures user guide Note: To maintain a secure network, avoid using telnet or any other unprotected application when you are working on the switch. For example, if you use telnet to connect to a machine and then start an SSH or secure telnet session from that machine to the switch, the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 133
allowed per logical switch is 15. You can change passwords on user-defined accounts as described in "Changing an Account Password." If the track changes feature is enabled, the system keeps track of account names and login attempts. For large enterprises, Fabric OS also supports RADIUS services, as - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 134
Fabric OS procedures user guide ■ userConfig "--show -a" Shows all account information for a logical switch. ■ userConfig "--show -b" Shows all backup account information for a logical switch. HP recommends that you make a backup copy of the configuration file in case the configuration is lost or - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 135
Fabric OS procedures user guide 2. Issue the following command: userConfig "--delete name" where name change information for all accounts with lower permission on the logical switch. Accounts with the user role cannot. 1. Connect to the switch and log in as admin. 2. Enter the following command: - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 136
, you are prompted to enter the old password. Setting Up RADIUS AAA Service Fabric OS supports RADIUS authentication, authorization, and accounting service (AAA). When configured for RADIUS, the switch becomes a RADIUS client. In this configuration, authentication records are stored in the RADIUS - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 137
, the way a switch authenticates users depends on whether a RADIUS server is set up for that switch. For a switch with RADIUS support and configuration, authentication bypasses the local password database. For a switch without RADIUS support or configuration, authentication uses switch local account - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 138
must configure on the proxy switch. Accounting Support The RADIUS service supports accounting request and response packets so that accounting records can be centralized on the RADIUS server. The login account name, assigned role, and password are stored on the RADIUS server for each user. Setting - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 139
user guide 3. In the New RADIUS Client window: ■ In the Friendly name space, enter a name for the switch that allows you to identify it easily. ■ In the Client Address (IP or DNS) space, enter the IP address of the switch that configured on the switch (as for the user role (for example, HP User) in - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 140
user guide Configure Attribute. 20. In the Configure VSA (RFC Compliant) window, enter the following information in the spaces provided: ■ Vendor-Assigned Attribute Number: 1 ■ Attribute Format: string ■ Attribute Value: user role (for example, HP Admin) in the space . ■ In step 20, enter admin in - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 141
Local, User-Password == "johnPassword" HP-Auth-Role = "admin" 9. Save the user file. 10. Enter the following command to start the RADIUS server: /usr/local/sbin/radiusd 11. Log in to a client switch and issue the aaaconfig command to configure it as a client and enable RADIUS service, as described - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 142
user guide Setting Up the Switch The following procedures show how to use the aaaconfig command to set up a single switch for RADIUS service. You can also set up multiple switches simultaneously with the HP Fabric Manager optional software tool. To display the current RADIUS configuration - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 143
Fabric OS procedures user guide To delete a RADIUS server from the configuration: 1. Issue the following command: aaaConfig "--remove for packets traveling between the switch and the server. To change the order in which RADIUS servers are contacted for service, issue the following command: - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 144
SW-MIB cannot be disabled. If you enable the SW-EXTTRAP option, the Software Serial Number (swSsn) is included as a part of HP SW traps. It is also used in conjunction with the legacy StorgeWorks SAN Switch Integrated/64 to provide detailed group information for a particular trap. For information on - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 145
: Issue the agtCfgShow command, as in the following example: switch:admin> agtcfgshow Current SNMP Agent Configuration Customizable MIB-II system variables: sysDescr = FC Switch sysLocation = End User Premise sysContact = Field Support. authTraps = 1 (ON) SNMPv1 community and trap recipient - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 146
OS procedures user guide To modify the SNMP configuration values, issue the agtCfgSet command, as in the following example: switch:admin> Switch] sysLocation: [End User Premise] sysContact: [Field Support.] authTrapsEnabled (true, t, false, f): [true] SNMP community and trap recipient configuration - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 147
y, no, n): [no] Committing configuration...done. agent configuration reset to factory default Current SNMP Agent Configuration Customizable MIB-II system variables: sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support authTrapsEnabled = false SNMPv1 community and - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 148
user guide To modify the options for configuring SNMP MIB traps, issue the snmpmibcapset command, as in the following example: switch:admin> snmpmibcapset The SNMP Mib/Trap Capability has been set to support of the sensor associated with the connectivity unit has changed: - connUnitSensorStatus: the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 149
Fabric OS procedures user guide To view the SNMP MIB trap setup, issue the snmpmibcapshow command, as in the following example: switch:admin> snmpmibcapshow FE-MIB: YES SW-MIB: YES FA-MIB: YES SW-TRAP: YES swFCPortScn: NO swEventTrap: NO swFabricWatchTrap: NO swTrackChangesTrap: NO FA-TRAP: YES - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 150
Fabric OS procedures user guide 150 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 151
7 This chapter contains updates to the HP StorageWorks ISL Trunking Version 3.1.x/4.1.x User Guide, part number AA-RTSAC-TE. In the section "Trunking Ports," in the third bullet on page 17, replace the following information: ISL Trunking does not support the LE, L1, or L2 portcfglongdistance modes - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 152
that support trunking. ■ All trunking ports in the same trunk group should be configured to be the same Extended Fabrics distance (for example, LD - LD, L0.5 - L0.5, or L1 - L1). ■ As the distance increases, more buffer credits are needed, and fewer ports can form a trunk group. ■ SAN Switch 2/8 EL - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 153
Fabric OS reference guide 8 This chapter contains updates to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide, part number AA-RS24C-TE. New and modified commands for Fabric OS v3.2.x: ■ aaaconfig (new for v3.2.x) ■ agtcfgshow ■ authutil ■ configdownload ■ configure ■ fabretryshow - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 154
Fabric OS reference guide ■ snmpmibcapshow ■ switchshow ■ switchstatusshow ■ tempshow ■ userconfig (new for v3.2.x) ■ zonecreate ■ zoneobjectcopy (new for v3.2.x) ■ zoneobjectexpunge (new for v3.2.x) ■ zoneobjectrename (new for v3.2.x) 154 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 155
the following operands: --show --add server_IP Lists current RADIUS configurations. This information includes the RADIUS servers, port numbers, protocol, and so forth. The operand appears whether or not the RADIUS and switch database configuration are enabled. Adds a new RADIUS server. The minimum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 156
like root, factory, admin, and user, the login is always from the switch database. If no operands are specified, the command displays its usage. To display the usage: switch:admin> aaaConfig Usage: aaaConfig --show: display current AAA service configuration --add [options]: add - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 157
guide agtcfgshow Displays the SNMP agent configuration. Syntax agtcfgshow Availability All users Description This command displays the configuration of the SNMP agent in the switch. The following fields are displayed: sysDescr The system (switch trap recipients supported by the agent - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 158
Fabric OS reference guide There are six Access Control Lists (ACL) to restrict SNMP get and agent configuration: switch:admin> agtcfgShow Current SNMP Agent Configuration Customizable MIB-II system variables: sysDescr = FC Switch sysLocation = End User Premise sysContact = Field Support. - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 159
authutil Syntax Availability Description agtcfgset agtcfgdefault Fabric OS reference guide Manages authentication configuration. authutil ["--show"] | ["--set value"] Admin Use this command to display and set local switch authentication parameters. Use the --set option to change authentication - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 160
guide Operands Examples The operands are: --show --set value Displays local authentication configuration. Modifies authentication configuration. still select other DH groups. To display authentication configuration on the switch: switch:admin> authutil "--show" AUTH TYPE HASH TYPE GROUP - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 161
of the configuration file format. The download process uses either file transfer protocol (FTP) or the RSHD protocol (TCP service 514). Both of these services are widely available on UNIX® hosts, but less so on Windows hosts. On Windows NT®, the FTP server might have to be installed from the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 162
host name is not known to the switch. ■ The host IP address cannot be contacted. ■ The user does not have permission on the host. ■ The user runs a script that prints something at login. ■ The file does not exist on the host. ■ The file is not a switch configuration file. ■ The RSHD or FTP server is - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 163
for the file in the user's home directory on UNIX hosts and in the directory where the FTP or RSHD server is running on Windows hosts passwd If present, selects FTP. To download a configuration file from host citadel, using account jdoe and file config.txt: switch:admin> configDownload "citadel - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 164
guide See Also configdefault configshow configupload configure configure Syntax Availability Description Changes system configuration settings. configure Admin Use this command to change system configuration settings, including: ■ "Switch 172). Switch Fabric Settings There are a number of - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 165
OS reference guide Table 13: Switch Fabric Settings Domain BB Credit R_A_TOV Field Type Number Number Number E_D_TOV WAN_TOV MAX_HOPS Data Field Size Sequence-Level Switching Disable Device Probing Suppress Class F Traffic SYNC IO Mode VC Encoded Address Mode Disable Translative Mode Switch PID - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 166
To make it easier, the configure utility validates the modified values of these four parameters and prompts the user to reenter them if the devices when they connect to the fabric. Setting this to a value less than 2112 might result in decreased performance. Sequence-Level Switching When this - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 167
Channel Settings The switch provides the ability to tune the switch in a specific application by configuring the parameters for the switch's eight virtual channels. The first two virtual channels are reserved for the switch's internal functions and are not user configurable. Fabric OS 3.x Document - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 168
guide The default virtual channel settings have already been optimized for switch performance. Judiciously changing the default values might improve switch 5 VC Priority 6 VC Priority 7 Type Number Number Number Number Number Number Number Number Number Number Default 0 2 3 7 2 2 2 configurable - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 169
Fabric OS reference guide Table 15: Zoning Operation Parameter Field Type Disable Nodename Zone Transmission Mode Field End-Device RSCN Transmission Mode Domain RSCN-to-End Device for Switch IP Address or Name Change Type Number Number Default 1 0 Range 0 to 2 0 to 1 End-Device RSCN - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 170
become part of Firmware fix Firmware fix Hardware fix Do Not Allow AL_PA 0x00? Some loop devices do not operate well with AL_PA 0 on the same loop. This option provides a workaround for such devices. By default, the switch can use a phantom AL_PA 0 for an embedded port in a QuickLoop configuration - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 171
reference guide Table 19: System Services user login name, the system name, the login protocol or type, login time, idle time, and remote login location (if applicable). The retrieval of this information is supported by a number of operating systems that support RPC. On most UNIX-based systems (HP - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 172
Fabric OS reference guide Operands Special Inputs Special inputs are: Carriage return Interrupt End and RPCd are configurable. By default, all three attributes are enabled. Table 20 specifies the attributes for applications that can be changed. Table 20: Configure Application Attributes - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 173
guide To configure: switch:admin> configure Configure... Fabric parameters (yes, y, no, n): [no] y Domain: (1..239) [1] BB credit: (1..27) [16] R_A_TOV: (4000..120000) [10000] E_D_TOV: (1000 AL_PA 0x00?: (0..1) [0] Initialize All Looplets?: (0..1) [0] System services (yes, y, no, n): [no] y rstatd ( - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 174
Fabric OS reference guide See Also 174 Portlog events enable (yes, y, no, n): [no] y start(a switch start or re-start event : SNMP Enabled (yes, y, no, n): [yes] rpc: RPCd Enabled (yes, y, no, n): [yes] Committing configuration...done. (on, off): [on] (on, off): [on] (on, off): [on] (on, off): - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 175
Fabric OS reference guide switchenable uptime fabretryshow Syntax Availability Description Displays the retry count of the fabric commands. fabretryshow All users Use this command to display the retry count of various fabric commands. The first line of output displays SW_ISL, the ISL ports. - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 176
Fabric OS reference guide Example See Also To display the retry count of the fabric commands: switch:user> fabretryshow SW_ILS E_Ports 0 1 2 3 4 5 6 7 ELP 0 0 0 0 0 0 0 0 EMT 0 0 0 0 0 0 0 0 ETP 0 0 0 0 0 0 0 0 EFP 0 0 0 0 0 0 0 0 DIA 0 0 0 0 0 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 177
, the following fields are displayed: Group ID The alias group number and D_ID. Token The alias group token (assigned by the N_Port) None To display a fabric of four switches (sw180 is the principal switch, three of the switches are configured to run IP over Fibre Channel, and there is one - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 178
Fabric OS reference guide fabstatsshow Displays the fabric statistics information. Syntax fabstatsshow Availability All users Description Use this command to display the statistics information for the fabric. The following information is displayed: ■ Number of times a switch domain ID was - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 179
OS reference guide To display the fabric statistics: switch:user> fabstatsshow Description Number of sync loss occurrences exceeded limit for time period. - PER Number of protocol errors exceeded limit for time period. - INW Number of invalid words exceeded limit for time period. - CRC Number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 180
OS reference guide Operands Example all ports are displayed. The following operands are supported: --p portNumber Yields a port detail report information for specified ports: vxTarget:admin> fwportDetailShow Port Detail Report Switch Name: vxTarget IP address: 192.168.204.82 Port Exception - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 181
reference guide Sets parameters controlled by Fabric Watch. fwset ["--message", "mlevel"] | ["--port", "--persistence", "seconds"] All users Use before being actually recognized as such. To turn off console logging: switch:admin> fwSet "--message", "-1" Fabric OS 3.x Document Addendum 181 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 182
OS reference guide To set the port persistence time to 18 seconds: switch:admin> fwSet "--port", "--persistence", "18" fwshow Syntax Availability Description Operands Examples 182 Displays the thresholds monitored by Fabric Watch. fwshow ["--message"] | ["--port", "--persistence"] All users If no - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 183
See Also Fabric OS reference guide To display valid thresholds named envTemp001: switch:admin> fwShow "envTemp001" Env Temperature Disabled? No Locked? No To display valid thresholds named envTemp: switch:admin> fwShow "envTemp*" Name Label Last value envTemp001 Env Temperature - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 184
if the ports were active. If the user specifies a destination port that is not active, pathinfo uses the embedded port as the destination. For switches with blades, the ingress and egress points are specified as area numbers. For a nonbladed switch, ingress and egress points are specified as ports - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 185
guide . Statistics are not reported for the embedded port. Some values are measured over number of 4-byte Fibre Channel words Frames Total number of frames Errors Total number switches, or the reverse path might even involve different switches. The trace reverse path option allows the user - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 186
are not directly connected, the switches in between are ignored. In case of a loose source route, the switches in between switch. pathinfo returns the state of the port (or area). The embedded port (-1) is used by default, or if the user specifies a destination port that is not active. For a switch - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 187
next hop is specified, the user is not prompted for the domain of the next switch that is determined by the switch:admin> pathInfo 91 Target port is Embedded Hop In Port Domain ID (Name) Out Port BW Cost 0 E 9 (web226) 2 1G 1000 1 3 10 (web229) 8 1G 1000 2 8 8 (web228) 9 1G 1000 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 188
guide To invoke pathinfo through the menu, including basic and extended statistics: switch port is Embedded Hop In Port Domain ID (Name) Out Port BW Cost 0 E 9 (web226) 2 1G 1000 Port B/s Out Port BW Cost 1 3 10 (web229) 12 1G 1000 (continued on next page) 188 Fabric OS 3.x - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 189
guide See Also passwd Syntax Availability Port B/s (1s) B/s (64s) Txcrdz (1s) Txcrdz (64s) F/s (1s) F/s (64s) Words Frames Errors 3 12 - 1665662 56849 - - - 4 - - portstatsshow switchshow Changes system passwords. passwd [ "login_name" ] All users Fabric OS 3.x Document Addendum 189 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 190
command can run only on the primary switch. The changed password database is distributed to all FCS switches. Non-FCS switches are updated if the password of the user account is changed. ■ The command is disabled until the user has changed all login passwords from the manufacturer's defaults or the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 191
Also Fabric OS reference guide To change the admin password: switch:admin> passwd "admin" Old password: New password: Re-enter new password: Committing configuration...done. All error messages are preceded by the command name and followed by one of the following messages: "user" is not a valid - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 192
Fabric OS reference guide perfmonitorclear Syntax Description Operands Clears statistics counters of end- end monitor: switch:admin> perfMonitorClear "EE", 2, 5 End-to-End monitor number 5 counters are cleared To clear statistics counters for a filter-based monitor: switch:admin> perfMonitorClear - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 193
Fabric OS reference guide To clear statistics counters for an ISL monitor: switch:admin> perfMonitorClear " ", port [, interval] Availability All users Description Use this command to display previously ISL (interswitch link). port Specifies the port number in which to display the end-to-end - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 194
Fabric OS reference guide Examples To display end-to-end monitors on port 3: switch:admin> perfMonitorShow "EE", 3 There are 2 end-to-end monitor(s) defined on port 3. KEY SID DID OWNER_APP OWNER_IP_ADDR TX_COUNT RX_COUNT CRC_COUNT 0 0xb1300 0xb23ef TELNET N/A 0x0000000000000000 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 195
guide To display filter-based monitors on port 4 for every second (in this example, there are two monitors on port 4, 0 and 1): switch:admin switch:admin> perfmonitorshow "ISL", 7 Total transmit count for this ISL: 21748 g 780204495 Number of destination domains monitored: 16 Number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 196
guide perfshoweemonitor Displays user-defined end-to-end monitors on a port. Syntax perfshoweemonitor port [, interval] Note: This command is deprecated. The perfmonitorshow command should be used instead. Availability Description Operands All users the port number where you 3: switch:admin> - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 197
OS reference guide To display all EE monitors on port 3 for every second (in this example, there are two monitors on port 3: 0, 1): switch:admin> switch then attempts to initialize that port as only a G_Port. The switch never attempts loop (L_Port) initialization on the port. The configuration - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 198
are required: port_number The port number to be configured: 0 through 7 or 0 through 15. mode A value of 1 means port_number is designated as a locked G_Port. A value of 0 means port_number is configured from its previous role as a locked G_Port. To configure switch port 3 as a locked G_Port - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 199
OS reference guide This command has the following operands: port_number The port number to be configured. This operand is required. ISL R_RDY mode Set to 1 to enable. Set to 0 to disable. This operand is required. To configure port 3 to have ISL R_RDY mode disabled: switch:admin> portCfgISLMode - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 200
Fabric OS reference guide The long-distance level string must be one of the following: L0 Reconfigure the port to be a regular switch port. The number of buffers reserved for the port supports up to 10 km links at 1 Gbit/sec. LE Level E mode is for E_Ports for distances beyond 5 km and up to - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 201
with long-distance links between StorageWorks 2 GB switches. Configurations with long-distance links between 2000- and 3000-series switches are not supported. To configure switch port 3 to support a 100 km link: switch:admin> portCfgLongDistance 3, "L2" Committing configuration...done. See Also To - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 202
can be set as a private L_Port and the FLOGI is rejected. The switch never attempts point-to-point (F_Port) initialization on the port. The following operands are required: port_number The port number to be configured: 0 through 7 or 0 through 15. mode mode1 mode2 A value of 1 means port_number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 203
YES - - - - Fairness To configure switch port 5: sw5:admin> portCfgLport 5, 0, 0, 2 Committing configuration...done. sw5:admin> portCfgLport Ports: configure portshow switchshow portshow Syntax Availability Displays port status. portshow port_number All users Fabric OS reference guide - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 204
guide Description Use this command to display port status information. Some information varies with the switch model and port type. The output displays the following: portName A user status flags. portType The port's type and revision numbers. portState portPhys portScn The port's SNMP state: - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 205
first column displays interrupt statistics: Interrupts Total number of interrupts. Unknown Interrupts that are not counted elsewhere. Lli Low-level interface (physical state, primitive seqs). Proc_rqrd Frames delivered for embedded N_Port processing. Timed_out Frames that have timed out - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 206
of CRC errors. Delim_err Number of SOF or EOF errors. Address_err Number of IUs with a nonzero status received. Lr_in Number of link reset requests received. Lr_out Number of link reset requests sent out. Ols_in Number of OLS Primitives received. Ols_out Number of OLS Primitives sent - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 207
Example See Also Fabric OS reference guide To display an E_Port: sw5:admin> portShow 3 portName: portHealth device(s) connected: 20:00:00:60:69:50:03:83 Distance: normal Speed:2Gbps Interrupts: 15502 Link_failure: 0 Frjt: 0 Unknown: 0 Loss_of_sync: 2 Fbsy: 0 Lli: 12 Loss_of_sig: - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 208
Fabric OS reference guide quietmode Sets or clears shell quiet mode. Syntax quietmode [newMode] Availability All users (display) Admin (set/clear) Description Use this command to affect the output displayed on the switch console (serial port or telnet session). Note that enabling quiet mode - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 209
Fabric OS reference guide secauthsecret Syntax Availability Description Operands Displays, sets, or saved persistently. New data is effective with the next authentication request. The configuration applies to a switch instance only. Without any specified action, the command displays the usage. - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 210
Fabric OS reference guide To set the shared secrets with a WWN, interactively: switch:admin> secAuthSecret "--set" This keys does not initiate DH-CHAP authentication. If switch is configured to do DH-CHAP, it is performed whenever a port or a switch is enabled. Following inputs should be specified - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 211
with a list of Fabric Configuration Server (FCS) switches in the FCS_POLICY. ■ Distributing the security database to all switches in the fabric. ■ Resetting the root, factory, admin, and user account passwords on all FCS switches in the fabric. ■ Resetting the admin account password on all non-FCS - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 212
switch) for root, factory, admin, and user accounts. A non-FCS admin account password is set the same as FCS admin account password. The command does not prompt for new passwords. Only sessions whose account password DCC policy, so no device can be connected to them, preserving the fabric as is. - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 213
. If the FCS list of switches is not specified, the session becomes interactive and the user is prompted to enter FCS members. If the --currentpwd option is not used, the session becomes interactive and the user is prompted to enter new passwords for root, factory, admin, user, and non-FCS admin - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 214
guide Examples To enable a security policy that includes three FCS switches specified by domain, WWN address, and switch name: fcsprimary:admin> secmodeenable Your use of the certificate-based security features of the software installed on this equipment is subject to the End User License - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 215
Policy or Password Change: root factory admin user will be logged out on switch 0 Connection closed by foreign host. user@hostmachine{238}% To use the quick mode option: fcsprimary:admin> secModeEnable "--quickmode" Your use of the certificate-based security features of the software installed on - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 216
Fabric OS reference guide See Also To use the current passwords option: fcsprimary:admin> secModeEnable "--currentpwd --fcs *" Your use of the certificate-based security features of the software installed on this equipment is subject to the End User License Agreement provided with the equipment - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 217
TRAPs Capability of the SNMP agent in the switch: FA-MIB SW-TRAP Specifying yes means the user can access FA-MIB variables with an SNMP resets the SNMP MIB and trap capability to default along with other SNMP agent configuration. The values can be changed, if a user downloads the configuration - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 218
guide Operands Example See Also None To set the SNMP MIB and trap capabilities of a switch: Cylon51:admin> snmpmibcapset The SNMP Mib/Trap Capability has been set to support (yes, y, no, n): [no] y Committing configuration...done. agtcfgdefault agtcfgset agtcfgshow 218 Fabric OS 3.x Document - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 219
TRAPs Capability of the SNMP agent in the switch: FA-MIB SW-TRAP Specifying yes means the user can access FA-MIB variables with an SNMP resets the SNMP MIB and trap capability to default along with other SNMP agent configuration. The values can be changed, if a user downloads the configuration - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 220
reference guide Operands Example See Also None To display the MIB and trap capabilities of a switch: switch and port status. switchshow ["--option"] All users Use this command to display switch and port status information. Some information varies with the switch model: for instance, the number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 221
's embedded port D_ID. switchWwn The switch's World Wide Name. switchBeacon The switch's beaconing state: either ON or OFF. Zoning The switch's zoning state (either ON or OFF) and effective zone configuration, within parenthesis. The switch summary is followed by one line per port: port number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 222
guide configured as a long-distance port, the long-distance level appears in the format Lx, where x is the long-distance level number switch. - F_Port: Point-to-point port; displays WWN of attached N_Port. - G_Port: Point-to-point but not yet E_Port or F_Port. - L_Port: Loop port; displays the number - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 223
guide An E_Port displays one or more of the following: - WWN of the switch connected - Switch name of the switch connected - One or more interswitch link attributes - Trunk master: - The port is the master port in a group of trunking ports. - Trunk port, master is port #x: - The port is configured - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 224
connected to another switch, sw6. If the optional -portcount operand is used, only the number of ports is displayed. switch No_Light port 9: -- AN No_Module port 10: -- AN No_Module port 11: -- AN No_Module port 12: sw AN No_Light port 13: id 2G Online E-Port (Trunk port, master is port #15) - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 225
guide portcfgspeed portcfgtrunkport portdisable portenable switchdisable switchenable switchname switchstatusshow Syntax Availability Description Displays the overall status of the switch. switchstatusshow All users Use this command to display the overall status of the switch (enclosure - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 226
Report time: 07/22/2003 09:12:39 AM tempshow Syntax Availability Description Operands Displays temperature readings. tempshow All users Use this command to display the current temperature readings from each temperature sensor located on the switch's main printed circuit board (PCB). The - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 227
on the permission or role of the default admin or user account. When the command completes, the account name and other attributes are saved persistently. On a platform supporting multiple domains, the affected accounts apply only to the switch domain from which the command was executed. In Secure - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 228
Fabric OS reference guide --change username [options] --recover [options] Changes attributes for the account username. Recovers one or more accounts from backup; created by Secure Fabric OS operations. Note: The --show action is the only one available to accounts with user-level permission. All - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 229
guide Adds a new account named username to the switch, with the given authorization of rolename. The -d option gives a text description for the new account. This command also prompts for an initial password ASCII characters. - rolename must be either user, admin, or nonfcsadmin. The nonfcsadmin role - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 230
guide Examples --change username [-r rolename] [-d description] [-e yes | no] --recover Changes attributes for an existing account, named username, in the switch add a new account: switch:admin> userConfig "--add joe -r admin -d Joe Smith" Enter new password: Re-type new password: Account joe has - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 231
OS reference guide To change account attributes: switch:admin> numbers s,p, where s is the switch number (domain ID) and p is the port number on that switch; for example, 2,12 specifies port 12 on switch number 2. When a zone member is specified by physical fabric port number, all devices connected - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 232
:00:00:8a contains devices connected to switch 2, ports 12 and 14, and the device with a World Wide Name of 10:00:00:60:69:00:00:8a (either node name or port name), whichever port in the fabric to which it is connected. Note: This command changes the defined configuration (see cfgshow). For the - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 233
Fabric OS reference guide zoneobjectcopy Copies a number of letters, numerals, and underscores. Names are case sensitive; for example, Cfg_1 and cfg_1 are different zone configurations. Spaces are ignored. This command changes the defined configuration. For the change to be preserved across switch - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 234
Fabric OS reference guide See Also cfgadd cfgclear cfgdelete cfgdisable cfgenable cfgremove cfgsave , including CFG, zone, and alias. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory, using the cfgsave - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 235
Also Fabric OS reference guide To create a configuration containing three zones: switch:admin> cfgShow Defined configuration: cfg: USA_cfg Red_zone; White_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 zone: White_zone 1,3; 1,4 alias: array1 21:00:00:20:37:0c:76 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 236
can be followed by any number of letters, numerals, and underscores. Names are case sensitive; for example, Cfg_1 and cfg_1 are different zone configurations. Spaces are ignored. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 237
See Also cfgadd cfgclear cfgdelete cfgdisable cfgenable cfgremove cfgsave cfgshow zoneobjectcopy Fabric OS reference guide Fabric OS 3.x Document Addendum 237 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 238
Fabric OS reference guide 238 Fabric OS 3.x Document Addendum - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 239
to the HP StorageWorks Fabric Watch Version 3.1.x/4.1.x User Guide, part number AA-RTSGC-AA. On page 26, following the section "Activating with Web Tools," add the following: Fabric Watch Reports You can run reporting commands in Fabric Watch to get instant access to switch information. Although - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 240
Fabric Watch User Guide Fabric Watch threshold messages contain the following standard elements: severity, severity number, timestamp, message number, sequence number, severity, customer-assigned switch name, component name, message text, component state The following is a Fabric Watch threshold - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 241
Fabric Watch User Guide Table 21: Fabric Watch Message Elements (Continued) Format Element Description Component The element relevant to the message. Message Text Textual message containing up to eight - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 242
Fabric Watch User Guide Switch1_216:root> switchstatusshow Switch Health Report Switch Name: Switch1_216 IP address: 10.32. /2004 9:03:01 PM All ports are healthy value=0 Switch1_216:root> Figure 33: Switch Health Report The final portion of the report, detailing port health, is not available - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 243
Fabric Watch User Guide >fwportdetailshow Port Detail Report Switch Name: swd21 IP address: 10.32.243.21 Port Exception report [by All] Report time: 01/16/2004 11:12:28 AM --------Port-Errors SFP-Errors---Port# Type State Dur(H:M) LFA LSY LSI PER INW CRC PSC STM SRX STX SCU SV0 000 E - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 244
user-defined period of time before the port state affects the overall switch state. The monitor returns to a normal state when a problem is temporary. However, if the problem long as the problem exists. You can modify the default error persistence value of 18. To configure the port error persistence - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 245
AAA service tab 49 aaaconfig command 138, 155 account password, changing authorized reseller, HP 12 authutil command 159 B backing up config file 43 BB credit field 165 browsers supported by web configdownload 132, 161, 217 configupload 132 configure 132, 145, 164 fabretryshow 175 fabricprincipal - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 246
79 configupload command 132 configure (arbitrated loop) tab 40 configure (fabric) tab 37 configure (system) tab 41 configure (upload/download) tab 42 246 configure (virtual channel) tab 39 configure command 132, 145, 164 configuring RADIUS server 50 configuring security features 131 conventions - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 247
81 firmware tab 28, 29 firmwaredownload command 132 fwportdetailshow command 179 fwset command 181 fwshow command 182 G gbicshow command 221 Fabric OS 3.x Document Addendum Index general tab 19 getting help 12 H help, obtaining 12 HP authorized reseller 12 storage web site 12 technical support 12 - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 248
-CT_REQUEST_FAIL message 113 N name server information, displaying 62 network configuration tab 27 network security 132 P passwd command 137, 189, 167 perfshoweemonitor command 196 pkicert command 79 pkishow command 79 platforms supported by web tools 18 port detail report 242 port error persistence - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 249
server adding 143 configuring 50 deleting 144 enabling and disabling 50, 143 modifying 51 modifying order 51 removing 52 setting up 139 RADIUS service, accounting support 139 RADIUS, use of 138 RAM requirements 18 ramtest command 99 rapid parameter 171 rebooting a switch 30 related documentation - HP StorageWorks MSA 2/8 | HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 250
69 firmware 28, 29 general 19 license admin 33 network configuration 27 port setting 35 routing (FSPF route) 44 routing (link cost) 46 routing (static route) 45 SNMP 31 switch information 26, 43 threshold configuration 54 trunk information 52 upload/download 29 zone 68 technical support, HP 12
document addendum
HP StorageWorks
Fabric OS 3.x
First Edition (January 2005)
Part Number:
AA–RW24A–TE
This document is an addendum for Fabric OS users to supplement the Fabric OS version 3.x documentation
set. This document is specific to Fabric OS version 3.x and all switches running Fabric OS version 3.x,
including the HP StorageWorks SAN Switch 2/8 EL, SAN Switch 2/16, and MSA SAN Switch 2/8.