HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Event Messag - Page 30

Event Message Descriptions Note: If the action does not resolve the problem or further clarification is needed, please contact your HP Authorized Service Provider. Table 5: Warning event messages (Page 2 of 2) Event message ID [W] [8400.0035] [Switch] [Retrying port port_number that was Downed due to excessive errors] Definition A port that was disabled by the threshold monitoring application is periodically retried to see if the error conditions have been cleared. [W] [8700.0009] [EPort] [Port: port_number] [Inter-Switch Link (ISL) communication error] [W] [8700.000A] [EPort] [Port: port_number] [No response from remote switch, resetting Inter-Switch Link (ISL)] [W] [8F00.000C] [Fabric Status status] [W] [8F00.000D] [Switch Status status] [W] [8F00:000E] [Link Status status] The neighbor switch that is connected to this ISL is indicating that it has lost our identity. No communication has been received from the neighbor switch for some time indicating that it may not be functioning properly. The E_Port will be reset in an attempt to reestablish the ISL. The severity of the fabric status has changed. The Description field will show the reason for fabric status. The severity of the switch status has changed. The Description field will show the reason for the switch status. The severity of the link status has changed. The description field will show the reason for link status. Action This may be a hardware error. Check the cables, SFP, etc. If the problem persists, refer to "Port error blinking patterns" in the HP StorageWorks 2/8q Fibre Channel Switch Installation Guide. Not supported by HP. Not supported by HP. Check Description field for reason. Check Description field for reason. Not supported by HP. 28 HP StorageWorks 2/8q Fibre Channel Switch Event Messages Reference Guide