HP StorageWorks MSA1510i/MSA20 HP StorageWorks 1510i Modular Smart Array Firmw - Page 4

Prerequisites, Installation instructions

Page 4 highlights

Prerequisites Before upgrading to firmware 1.32, the MSA 1510i Installation Software CD version 1.20 must be downloaded and used to update host drivers and utilities that are compatible with the active/passive firmware. Installation instructions For instructions on installing the firmware, see the HP Storage Management Utility guide located on the Technical Documents page of the MSA 1510i website: http://www.hp.com/go/msa1510i. NOTE: Dual controller configurations must run the same versions. Cloning of the controller firmware is automatically performed from one controller to the other. For additional information, see the HP StorageWorks Modular Smart Array 1510i maintenance and service guide located on the Technical Documents page of the MSA 1510i website: http://www.hp.com/go/msa1510i. 4 About this document

  • 1
  • 2
  • 3
  • 4

Prerequisites
Before upgrading to
rmware 1.32, the MSA 1510i Installation Software CD version 1.20 must be
downloaded and used to update host drivers and utilities that are compatible with the active/passive
rmware.
Installation instructions
For instructions on installing the
rmware, see the HP Storage Management Utility guide located on the
Technical Documents page of the MSA 1510i website:
h
t
t
p
:
/
/
w
w
w
.
h
p
.
c
o
m
/
g
o
/
m
s
a
1
5
1
0
i
.
NOTE:
Dual controller con
gurations must run the same versions. Cloning of the controller
rmware is
automatically performed from one controller to the other. For additional information, see the HP
StorageWorks Modular Smart Array 1510i maintenance and service guide located on the Technical
Documents page of the MSA 1510i website:
h
t
t
p
:
/
/
w
w
w
.
h
p
.
c
o
m
/
g
o
/
m
s
a
1
5
1
0
i
.
4
About this document