HP StorageWorks MSA1510i/MSA30 HP StorageWorks 1510i Modular Smart Array Firmw - Page 4
Prerequisites, Installation instructions
View all HP StorageWorks MSA1510i/MSA30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Prerequisites Before upgrading to firmware 1.32, the MSA 1510i Installation Software CD version 1.20 must be downloaded and used to update host drivers and utilities that are compatible with the active/passive firmware. Installation instructions For instructions on installing the firmware, see the HP Storage Management Utility guide located on the Technical Documents page of the MSA 1510i website: http://www.hp.com/go/msa1510i. NOTE: Dual controller configurations must run the same versions. Cloning of the controller firmware is automatically performed from one controller to the other. For additional information, see the HP StorageWorks Modular Smart Array 1510i maintenance and service guide located on the Technical Documents page of the MSA 1510i website: http://www.hp.com/go/msa1510i. 4 About this document