HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Controller M - Page 4

Verifying configuration settings After replacing a controller, verify that system configuration settings are set properly for your environment. Repeat the commands shown in "Recording configuration settings" on page 2 and compare the current values with those recorded before the installation. If necessary, change the settings to their previous values. For more information, see online help or the HP StorageWorks 2000 Family Modular Smart Array reference guide. Verifying the firmware version After installing a controller, verify that the latest firmware is installed on all controllers in the enclosure. Go to the HP Support website at nl http://www.hp.com/support and navigate to the page for your enclosure. If newer firmware is available, download the firmware from the Web to your local system and install that latest version on the controllers. For more information on firmware updates, see the enclosure user guide. Returning the failed items In materials shipped with the replacement, HP specifies whether the failed component must be returned. Follow the provided instructions. Additional information HP P2000/MSA Disk Arrays: http://www.hp.com/go/msa HP storage: http://www.hp.com/storage HP support: http://www.hp.com/support HP documents: http://www.hp.com/support/manuals Page 4