HP StorageWorks MSA2212fc HP 2000 Modular Smart Array Controller Firmware J202 - Page 13
Installing firmware using the Storage Management Utility (SMU), Extract
View all HP StorageWorks MSA2212fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing firmware using the Storage Management Utility (SMU) 1. Obtain the firmware package and save it to a temporary directory. Firmware for all HP products is available from the HP Business Support Center website at http://www.hp.com/support/ downloads. 2. If using a Smart Component, extract the contents of the Smart Component using one of the following methods: • In Windows-Click Extract on the first screen of the Smart Component. • In Linux-Enter a command using the following syntax: ./CPxxxxxx.scexe --unpack= where ./CPxxxxxx.scexe represents the Smart Component filename represents the filename of the destination folder for the extracted binary file 3. Locate the firmware file in the downloaded/extracted folder. The firmware filename is in the following format: neptunesw-JxxxPyy-zz.bin 4. In single-domain environments, stop all I/O to vdisks before starting the firmware update. 5. Log in to the SMU and select Manage > Update Software > Controller Software. A table displays currently installed firmware versions. 6. Click Browse, and then select the firmware file to install. 7. Click Load Software Package File. Allow approximately 30-60 minutes for the firmware to load, plus an additional 15-30 minutes for the automatic restart to complete on the controller you are connected to. Wait for the progress messages to specify that the update has completed. In dual-controller systems with Partner Firmware Update enabled, allow an additional 30-60 minutes for the second update, plus an additional 15-30 minutes for the second module to automatically restart. 8. In the SMU display, verify that the expected firmware version is installed on each module. Installation instructions 13