HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000 Modular Smart Ar - Page 87
Connect the AC power cord to the power supply., Engage the cord lock.
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
3. While lifting up the power supply module latch (1), grasp the fan element and pull the defective power supply assembly out of the chassis (2). 1 2 15557 Installing the component 1. Lift up on the power supply module latch (1) and slide the assembly into the chassis until it is fully seated (2). 1 2 15558 2. Connect the AC power cord to the power supply. 3. Engage the cord lock. Verifying proper operation After replacing the power supply, verify that: • The power supply LED is solid green. • No new error messages are displayed on the array controller LCD panel. maintenance and service guide 87
3.
While lifting up the power supply module latch (
1
), grasp the fan element and pull the defective
power supply assembly out of the chassis (
2
).
1
2
15557
Installing the component
1.
Lift up on the power supply module latch (
1
) and slide the assembly into the chassis until it is fully
seated (
2
).
1
2
15558
2.
Connect the AC power cord to the power supply.
3.
Engage the cord lock.
Verifying proper operation
After replacing the power supply, verify that:
•
The power supply LED is solid green.
•
No new error messages are displayed on the array controller LCD panel.
maintenance and service guide
87