HP StorageWorks Modular Smart Array 1000 Configuring the HP StorageWorks Modul - Page 28
Press Enter on, Driver name, Select/Modify driver parameters.
![]() |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Configuring the MSA1000/MSA1500cs for External Boot - NetWare 28 10. You will need to modify the QLogic driver parameters, arrow down to the QL2300.HAM under Driver name, and press Enter. To modify the driver parameters. Press Enter on Select/Modify driver parameters. 11. Add slot number that corresponds to the slot number of the server where the HBA was installed.
![](/manual_guide/products/hewlettpackard-storageworks-modular-smart-array-1000-configuring-hp-storageworks-modular-smart-array-1000-1500cs-external-boot-novell-netware-new-installations-technical-note-2006-6f4096a/28.png)
Configuring the MSA1000/MSA1500cs for External Boot - NetWare
28
10.
You will need to modify the QLogic driver parameters, arrow down to the QL2300.HAM
under
Driver name
, and press Enter.
To modify the driver parameters.
Press Enter on
Select/Modify driver parameters.
11.
Add slot number that corresponds to the slot number of the server where the HBA was
installed.