HP StorageWorks SB40c HP StorageWorks SB40c Storage Blade Installation Instruc - Page 1

HP StorageWorks SB40c Storage Blade Installation Instructions Overview Installation of an SB40c requires the following steps: 1. Install and configure an HP BladeSystem c-Class enclosure. 2. Install any SB40c options. 3. Install the SB40c. 4. Install the partner server blade. For definitions of the acronyms used in this document, refer to "Acronyms and abbreviations" in the storage blade user guide. Shipping carton contents When unpacking the HP StorageWorks SB40c storage blade, locate the following items: • HP StorageWorks SB40c storage blade • Coupler plate • Documentation kit Installing an HP BladeSystem cClass enclosure Before performing any procedures specific to the SB40c, install an HP BladeSystem c-Class enclosure. The most current documentation for HP BladeSystem components is available at the HP website (http://www.hp.com/go/bladesystem/documentation). Documentation is also available in the following locations: • Documentation CD that ships with the enclosure • HP Business Support Center website (http://www.hp.com/support) • HP Technical Documentation website (http://docs.hp.com) © Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. September 2006 (First Edition) Part Number 433905-001