HP StorageWorks SN6000C Cisco Nexus 5000 Series MIB Quick Reference (OL-16784- - Page 3
SNMP Traps and Informs, Interpreting the MIB Structure
View all HP StorageWorks SN6000C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
MIBs and Network Management Send documentation comments to [email protected] Table 1 SNMP Operations (continued) Operation Description trap inform2 Sends an unsolicited message by an SNMP agent to an SNMP manager indicating that some event has occurred. Sends an unsolicited message by an SNMP agent to an SNMP manager indicating that some event has occurred. An inform differs from a trap in that an acknowledgement is required from the manager. 1. With this operation, an SNMP manager does not need to know the exact variable name. A sequential search finds the next variable from within the MIB. 2. The get-bulk and inform commands are not a part of SNMPv1. 3. The get-bulk and inform commands are not a part of SNMPv1. SNMPv1 was the initial version of the protocol. SNMPv2 added support for 64-bit counters, and SNMPv3 added increased security for access, authentication, and encryption of managed data. SNMP Traps and Informs You can configure Cisco Nexus 5000 Series switches to send notifications to SNMP managers when particular events occur. You can send these notifications as traps or inform requests. Traps are unreliable because the receiver does not send any acknowledgment when it receives a trap. The sender cannot determine if the trap was received. However, an SNMP manager that receives an inform request acknowledges the message with an SNMP response. If the sender never receives a response, the inform request can be sent again. Informs are more likely to reach their intended destinations than traps. Notifications may contain a list of MIB variables (varbinds) that clarify the status that is relayed by the notification. The list of varbinds associated with a notification is included in the notification definition in the MIB. In the case of standard MIBs, Cisco has enhanced some notifications with additional varbinds that further clarify the cause of the notification. See the "Extending the IF-MIB" section on page 9 for an example of these extensions in the IF-MIB. Use the SNMP-TARGET-MIB to obtain more information on trap destinations and inform requests. See the Cisco Nexus 5000 CLI Configuration Guide for more information on configuring traps and informs. Note You must enable most notifications through the CLI. For more information, see the Cisco Nexus 5000 Series CLI Configuration Guide, Release 4.0. Interpreting the MIB Structure A MIB presents the managed data in a logical tree hierarchy, using an IETF standard syntax called the Structure of Management Information (SMI). Branches of this MIB tree are organized into individual tables, which contain the managed data as leaf objects. This section includes the following topics: • Object Identifiers, page 4 • Tables, page 4 • SYNTAX Clause, page 5 • MAX-ACCESS Clause, page 5 OL-16784-01 Cisco Nexus 5000 Series MIB Quick Reference 3