HP StorageWorks XP10000 HP StorageWorks XP Disk Array Configuration Guide: Nov - Page 9

error-reporting operations requested by the SNMP manager. SNMP properties are usually set from the SVP but they can also be set remotely using XP Remote Web Console or XP Command View Advanced Edition Software. Refer to the applicable user's guide for procedures. Figure 1 SNMP configuration . Installation roadmap Perform these actions to install and configure the disk array: 1. Installing and configuring the disk array • Setting the host mode and host group mode for the disk array ports • Setting the system option modes • Configuring the Fibre Channel ports 2. Installing and configuring the host • Loading the operating system and software • Installing and configuring the FCAs • Configuring NetWare Client • Configuring NetWare ConsoleOne • Fabric zoning and LUN security • Fabric zoning and LUN security for multiple operating systems 3. Connecting the disk array to the NetWare server • Defining the paths • Verifying new device recognition 4. Configuring disk devices • Creating the disk partitions • Assigning the new devices to volumes • Mounting the new volumes • Verifying client operations Installing and configuring the disk array The HP service representative performs these tasks: • Assembling hardware and installing software • Loading the microcode updates • Installing and formatting devices XP Disk Array Configuration Guide for Novell NetWare 9