HP StorageWorks XP48 HP StorageWorks Disk Array XP Operating System Configurat - Page 15
Installation procedures
View all HP StorageWorks XP48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation procedures The HP representative and you perform the following procedures: 1. "Install and configure the disk array" on page 14 • Setting the System Option Modes • Configuring the Fibre Channel ports • Setting the Host Mode for the disk array ports 2. "Install and configure the host" on page 18 • Loading the OS and software • Installing and configuring the HBAs • Clustering and Fabric zoning • Fabric zoning and LUN security for multiple operating systems 3. "Connect the disk array" on page 21 • Defining the paths • Verifying disk array device recognition 4. "Configure disk array devices" on page 24 Installation 13
Installation
13
Installation procedures
The HP representative and you perform the following procedures:
1.
“Install and configure the disk array” on page 14
•
Setting the System Option Modes
•
Configuring the Fibre Channel ports
•
Setting the Host Mode for the disk array ports
2.
“Install and configure the host” on page 18
•
Loading the OS and software
•
Installing and configuring the HBAs
•
Clustering and Fabric zoning
•
Fabric zoning and LUN security for multiple operating systems
3.
“Connect the disk array” on page 21
•
Defining the paths
•
Verifying disk array device recognition
4.
“Configure disk array devices” on page 24