HP StoreOnce 6500 HP StoreOnce VSA 1.1 Software Release Notes (TC458-96015, De - Page 3

Fixes, Outstanding issues not addressed in this release, Installation instructions (new deployment) - user guide

Page 3 highlights

Fixes N/A Outstanding issues not addressed in this release • If after deployment via SEM or vSphere client, the service set on the VSA is in failed to start state, this can be due to an invalid destination network selection during deployment. To recover from this scenario, edit the network settings on the VSA from vSphere client. Right click on the VSA - Edit Settings - Network adaptor option to select the appropriate destination network. After this, reboot the VSA to get the service set up and running. • In the event of loss of access to the datastore, the VSA service set goes down and file system becomes read-only. This behavior may be seen when the connectivity to the external ESXi storage is lost or removed when the VSA is powered on and running. The StoreOnce VSA may become unresponsive in this case. Contact HP Support for assistance at http://www.hp.com/support. • Deletion of a virtual disk added to the VSA is not supported. If done, this could result in the VSA becoming unusable. • Please refer the Troubleshooting section of the HP StoreOnce VSA Deployment and Configuration Guide for any further issues Installation instructions (new deployment) The instructions in this section assume that this is a new deployment of a StoreOnce VSA. If you are upgrading software on an existing StoreOnce VSA, refer to Update process (page 4). The StoreOnce VSA 1.1.1 ZIP package can be downloaded from the HP software kiosk. The ZIP structure is as follows: Filename Checksum (where relevant) Description TC458A Directory TC458A/storeoncevsa-500-3.7.1-1334.4.ovf c5f4836aef58a55618fcb0dc2b793e3f Open Virtualization Format file for the StoreOnce VSA TC458A/storeoncevsa-500-3.7.1-1334.4.mf 1ddb1fc5c40ad258dc736d0add7f31f3 Manifest file TC458A/storeoncevsa-500-3.71. -1334.4.disk1.vmdk f59f2469837042aa48469dfc0065e1b5 Virtual Machine Disk Format file for StoreOnce VSA TC458-96002 HP StoreOnce VSA User Guide TC458-96014 HP StoreOnce VSA Deployment and Configuration Guide TC458-96015 HP StoreOnce VSA Release Notes NOTE: To check whether there any updates to the documentation, go to: nl http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=5196525 • Please download the ZIP file from the software kiosk. • Unzip the ZIP file on a Windows or Linux server. The OVF, MF and VMDK files are to be used to deploy the VSA; all other files are VSA documentation. Fixes 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Fixes
N/A
Outstanding issues not addressed in this release
If after deployment via SEM or vSphere client, the service set on the VSA is in failed to start state,
this can be due to an invalid destination network selection during deployment. To recover from
this scenario, edit the network settings on the VSA from vSphere client. Right click on the
VSA —
Edit Settings — Network adaptor
option to select the appropriate destination network. After this,
reboot the VSA to get the service set up and running.
In the event of loss of access to the datastore, the VSA service set goes down and file system
becomes read-only. This behavior may be seen when the connectivity to the external ESXi storage
is lost or removed when the VSA is powered on and running. The StoreOnce VSA may become
unresponsive in this case. Contact HP Support for assistance at
h
t
tp://w
w
w
.hp
.co
m/su
ppo
r
t
.
Deletion of a virtual disk added to the VSA is not supported. If done, this could result in the VSA
becoming unusable.
Please refer the Troubleshooting section of the
HP StoreOnce VSA Deployment and Configuration
Guide
for any further issues
Installation instructions (new deployment)
The instructions in this section assume that this is a new deployment of a StoreOnce VSA. If you are
upgrading software on an existing StoreOnce VSA, refer to
Update process (page 4)
.
The StoreOnce VSA 1.1.1 ZIP package can be downloaded from the HP software kiosk.
The ZIP structure is as follows:
Description
Checksum (where relevant)
Filename
Directory
TC458A
Open Virtualization Format file for the
StoreOnce VSA
c5f4836aef58a55618fcb0dc2b793e3f
TC458A/storeoncevsa-500–3.7.1–1334.4.ovf
Manifest file
1ddb1fc5c40ad258dc736d0add7f31f3
TC458A/storeoncevsa-500–3.7.1–1334.4.mf
Virtual Machine Disk Format file for
StoreOnce VSA
f59f2469837042aa48469dfc0065e1b5
TC458A/storeoncevsa-500–3.7.
1–1334.4.disk1.vmdk
HP StoreOnce VSA User Guide
TC458–96002
HP StoreOnce VSA Deployment and
Configuration Guide
TC458–96014
HP StoreOnce VSA Release Notes
TC458–96015
NOTE:
To check whether there any updates to the documentation, go to:
nl
h
t
tp://h20
5
6
6
.w
w
w2
.hp
.co
m/po
r
t
al/sit
e/hp
s
c/pu
bli
c/p
si/man
ualsR
e
sults/?s
p4ts
.o
i
d=5
1
9
6
5
2
5
Please download the ZIP file from the software kiosk.
Unzip the ZIP file on a Windows or Linux server. The OVF, MF and VMDK files are to be used
to deploy the VSA; all other files are VSA documentation.
Fixes
3