HP Surestore 400ex 32/64/76 Slot, 5.2 Gbyte Drive Optical Jukebox Upgrade and - Page 51
Checking and Downloading Firmware
View all HP Surestore 400ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
NOTE Downloading Firmware Checking and Downloading Firmware Checking and Downloading Firmware If upgrading a jukebox: 1. Go to "Check the Firmware Revision Level" to see if the jukebox controller and/or drives need the current revision of firmware. 2. Go to "Downloading Firmware" if necessary. If converting a 2.6-GB-drive jukebox: 1. Go to "Downloading Firmware" and download the current revision of jukebox controller firmware. 2. Go to "Check the Firmware Revision Level" to see if the drives need current firmware. 3. Go to "Downloading Firmware" if Step 2 shows that the drives need current firmware. Check the Firmware Revision Level 1. Ensure the jukebox is powered on. 2. Press NEXT to select INFO *, then press ENTER. 3. REVISION # displays. Press ENTER to view the robotics controller firmware revision. 4. Write down the revision number, then press CANCEL. 5. Press NEXT until DRIVE FW * displays, then press ENTER. UPDATING displays briefly, then Dx REV zzzz displays (where x represents a drive number and z represents the revision level of that drive). 6. Press NEXT or PREV to select other drives and press ENTER. 7. After viewing the revision level for all drives, press CANCEL. 4- 3