HP Surestore Disk Array 12h HP SureStore E Disk Array FC60 - (English) Advance - Page 301
Setting the Cache Flush Limit, ammgr -L <cntrlrID>:<percent> <ArrayID>, percent
View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
Setting the Cache Flush Limit Sets the amount of unwritten data to remain in cache after a flush is completed on the given controller. The cache flush limit sets the level at which the disk array stops flushing cache contents to the disks. This value is expressed as a percentage of the current cache flush threshold. The default value for this setting is 100%. The cache flush limit can be set independently for each controller. To set cache flush limit, type: ammgr -L : • percent indicates the percentage of cache memory that remains full when flushing of cache contents stops. For example, if set to 90%, cache memory will be flushed until 90% of the cache amount defined by the cache flush threshold remains full. Command Example The following example sets the cache flush limit to 100% for controller A on disk array 0000005EBD20: ammgr -L A:100 0000005EBD20 Managing the Disk Array Using Array Manager 60 301 Managing the Disk Array on HP-UX