HP Surestore E Tape Library Model 6/60 HP SureStore Fibre Channel SCSI Bridge - Page 54
Problem, Cannot Turn On the Hub DLT, Cannot Turn On the Fibre Bridge, Cannot Confirm the Library,
View all HP Surestore E Tape Library Model 6/60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
NOTE Troubleshooting Guide Troubleshooting Problem: Cannot Turn On the Hub (DLT Only) If the hub will not power-up, use the following steps before taking further action: 1. Verify all power connections, breakers, and switch settings are working and correct. 2. Confirm that the power indicator is illuminated. 3. Verify that the fault indicator is not illuminated. 4. If the fault indicator is illuminated, the hub is inoperable; further diagnostic procedures cannot be performed. Contact the sales representative or an HP service representative. Problem: Cannot Turn On the Fibre Bridge If the Fibre Bridge will not power on, use the following procedures to diagnose the problem: 1. Verify that all power connections, breakers, and switch settings are powered on and are set correctly. 2. Confirm that the power indicator is illuminated green. 3. Verify that the fault indicator (amber) is not illuminated. 4. If the fault indicator is illuminated, the unit is inoperable; further diagnostic procedures cannot be performed. Contact the sales representative or an HP service representative. Problem: Cannot Confirm the Library Connection 1. Confirm the library connection by using the control panel menu on the NT server to review the SCSI device folder. The NT discovery process is not dynamic. When SCSI devices are powered on after the host, the control panel will not display their connection. 4- 4 Chapter 4